FOXBORO K0143AAAN電源模塊
1.產 品 介 紹
品牌：FOXBORO
型號：FOXBORO K0143AAAN電源模塊
產品說明：模塊卡件
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
FOXBORO K0143AAAN電源模塊電纜功能手持式編程器電纜提供允許手持式編程儀和可編程邏輯控制器通信的連接。該電纜還為HHP提供電源連接，以及向PLC指示HHP連接至PLC串行端口的信號。它還可用于將PLC上的RS-485串行端口連接至RS422/RS-485至RS-232轉換器FOXBORO K0143AAAN。電纜規格預接線電纜FOXBORO K0143AAAN長6英尺（2米）。如果連接到轉換器需要不同長度的電纜，請參閱以下信息以了解規格和接線信息。如果您打算建立自己的電纜，則此信息至關重要。以下列出了該電纜的建議電纜類型，具體取決于電纜的長度。與30英尺的電纜類型相同。此外，PLC無法為轉換器提供+5 VDC邏輯電源。它必須由連接到連接器轉換器端+5V和SG引腳的外部電源提供。PLC接頭上的+5V引腳不得連接到電纜。FOXBORO K0143AAAN
Function of cable The Hand-Held Programmer cable provides the connections that allow the Hand-Held Programmer and the Programmable Logic Controller to communicate. This cable also provides the power connections for the HHP, and a signal which indicates to the PLC that the HHP is attached to the PLC serial port. It can also be used to connect the RS-485 serial port on the PLC to the RS422/RS-485 to RS-232 converter FOXBORO K0143AAAN. Cable Specifications The prewired cableFOXBORO K0143AAANis 6 feet (2 meters) long. If a different length cable is required for connection to the converter, refer to the information below for specifications and wiring information. This information is essential if you intend to build your own cable. The recommended cable types for this cable are listed below and depend on the length of the cable.Same as for 30 feet. In addition, the+5 VDC logic power source for the converter cannot be supplied by the PLC. It must be provided by an external power supply connected to the +5V and SG pins at the converter end of the connector. The +5V pin at the PLC connector must not be connected to the cable. FOXBORO K0143AAAN
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
