REXROTH MSK061C-0300-NN-S1-UG0-NNNN伺服電機
1.產 品 介 紹
品牌：REXROTH
型號：REXROTH MSK061C-0300-NN-S1-UG0-NNNN
產品說明：伺服電機
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
REXROTH MSK061C-0300-NN-S1-UG0-NNNN伺服電機預接線I/O總線擴展電纜可用于連接擴展或遠程底板。如果標準電纜中沒有所需的電纜長度，必須構建自定義電纜（有關詳細說明，請參閱“構建自定義長度I/O總線擴展電纜”一節）。將單陽連接器連接到CPU基板右側的25針陰連接器將電纜雙連接器端的陽連接器連接至第一個擴展基板上的25針陽連接器連接未使用的25針母連接器電纜雙連接器端的連接器連接到第二條I/O總線擴展電纜的單陽連接器以繼續I/O總線擴展鏈，或者連接到I/O總線終端插頭（REXROTH MSK061C-0300-NN-S1-UG0-NNNN如果這是擴展中的最后一條電纜）。關于I/O總線擴展電纜的重要說明1。I/O擴展系統中可包含的最大電纜數為7根，CPU基板和最后一個擴展基板之間的最大電纜總長度為50英尺（15米REXROTH MSK061C-0300-NN-S1-UG0-NNNN
The prewired I/O bus expansion cables can be used for connecting either expansion or remote baseplates. Where required cable length is not available in a standard cable, REXROTH MSK061C-0300-NN-S1-UG0-NNNNa custom cable must be built (see the section “Building Custom Length I/O Bus Expansion Cables” for detailed instructions).REXROTH MSK061C-0300-NN-S1-UG0-NNNNConnect the single male connector to the 25-pin female connector on the right side of the CPU baseplate Connect the male connector on the dual connector end of the cable to the 25-pin female connector on the first expansion baseplat Connect the unused 25-pin female connector on the dual connector end of the cable to either the single male connector of a second I/O bus expansion cable to continue the I/O bus expansion chain, or to an I/O bus Terminator plug if this is the last cable in the expansion . Important Notes About I/O Bus Expansion Cables 1. The maximum number of cables that can be included in an I/O expansion system is seven, and the total maximum cable length between the CPU baseplate and the last expansion baseplate is 50 feet (15 metersREXROTH MSK061C-0300-NN-S1-UG0-NNNN
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
