B&R 8BVI0440HWS0.000-1驅動程序
1.產 品 介 紹
品牌：B&R
型號：B&R 8BVI0440HWS0.000-1驅動程序
產品說明：模塊卡件
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
B&R 8BVI0440HWS0.000-1驅動程序連接器–37針外螺紋D型，帶4-40螺釘，AMP罩編號1-207908-0或同等產品。15針外螺紋D型，帶M3螺釘和編號為207908-4的AMP罩或同等產品。AMP接頭未配備M3（公制）螺釘。Workmaster II至90系列PLC的多點配置下圖顯示了將Workmaster II、Workmaster或兼容計算機以8線多點串行數據配置連接至90系列PLCs的接線圖和要求。下圖是使用B&R 8BVI0440HWS0.000-1轉換器時多點配置所需的接線配置示例。注：Series 90-30 PLC中PLC串行端口的連接器必須是直角連接器，以便鉸鏈門關閉正確的帶轉換器的多點配置示例下圖是在計算機中安裝工作站接口板時所需的布線配置示例。B&R 8BVI0440HWS0.000-1
Connectors – 37-pinB&R 8BVI0440HWS0.000-1 male D-type with 4-40 screws and AMP hood No. 1-207908-0 or equivalent. 15-pin male D-type with M3 screws and AMP hood No. 207908-4, or equivalent. An AMP connector is not supplied with M3 (metric) screw . Multidrop Configuration, Workmaster II to Series 90 PLCs The following illustrations show the wiring diagram and requirements for connecting a Workmaster II,B&R 8BVI0440HWS0.000-1 Workmaster, or compatible computer to Series 90 PLCs in an 8-wire multidrop, serial data configuration. The figure below is an example of the wiring configuration required for the multidrop configuration when using the RS-422/RS-485 to RS-232 converter. Note The connector to the PLC serial port in the Series 90-30 PLC must be a right angle connector in order for the hinged door to close proper Example of Multidrop Configuration with Converter The following figure is an example of the wiring configuration required when a Work Station Interface board is installed in the computer.B&R 8BVI0440HWS0.000-1
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
