DEIF RMV-122D過壓保護繼電器
1.產 品 介 紹
品牌：DEIF
型號：DEIF RMV-122D
產品說明：過壓保護繼電器
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
DEIF RMV-122D過壓保護繼電器復位按鈕當OK LED亮起時，按下復位按鈕可重新初始化模塊。但是，如果OK（正常）指示燈熄滅（表示模塊故障），按下Reset（重置）按鈕將無效。串行連接器SCM前端安裝的串行端口連接器為兩個SCM串行端口提供所有連接。此連接器上的單獨引腳分配給端口和端口2。DEIF RMV-122D兩個端口都支持RS-232標準。只有端口2支持RS-485標準。DEIF RMV-122D提供了如下所述的特殊WYE電纜，用于分離連接器上的兩個端口連接。電纜信息電纜IC693CBL305可用于需要使用兩個SCM串行端口的應用中。這是一條Y形電纜，它將模塊的單個連接器上的端口和端口2連接斷開，連接到兩個單獨的連接器。該電纜的數據表可在本手冊的“電纜”一章中找到。DEIF RMV-122D
Reset Button Pressing the Reset pushbutton when the OK LED is ON re-initializes the module. However, if the OK LED is off (indicating a module failure), pressing the Reset button will have no effect.Serial Connector The SCM front-mounted serial port connector provides all of the connections for the two SCM serial ports. Separate pins on this connector are assigned for Port DEIF RMV-122D and Port 2. Both ports support RS-232 standard. Only Port 2 supports the RS-485 standard. A special WYE cable, described below, is available from GE Fanuc to separate the two port connections on the connector. Cable Information Cable IC693CBL305 can be used in applications that require use of both SCM serial ports. This is a Wye-type cable that breaks out the Port and Port 2 connections on the module’s single connector to two individual connectors. A data sheet for this cable can be found in the “Cables” chapter of this manual. DEIF RMV-122D
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
