DEIF LMR-122D保護繼電器電源
1.產 品 介 紹
品牌：DEIF
型號：DEIF LMR-122D
產品說明：保護繼電器電源
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
快遞方式：國內順豐、德邦、京東快遞包郵，按照實際報價貨期發貨
2.產 品 詳 情 資 料：
DEIF LMR-122D保護繼電器電源P（外部電源）-此綠色LED通常亮起，表示模塊正在通電。如果此LED熄滅，則可能表明TCM的內部保險絲斷開。R（運行）-此綠色LED通常亮起。當存在內部模塊故障時，此LED將與紅色故障（F）LED交替閃爍。F（故障）-此紅色LED通常熄滅。此燈在模塊啟動時閃爍，當TCM完成其內部啟動例程時熄滅。當存在內部模塊故障時，該LED將與綠色運行（R）LED交替閃爍。S（短路）-此紅色LED通常熄滅。DEIF LMR-122D當其中一個輸出電路短路時，此LED點亮。1–8（輸出狀態）-當模塊調節其輸出時，這些綠色LED通常打開和關閉。其中一個LED開啟與關閉的時間百分比代表該輸出的PWM周期。八個LED中的每一個對應于一個輸出通道。輸出接頭位于模塊右側。通道編號標記在連接器旁邊的模塊上。例如，LED 8對應于右側連接器上標記為8+和8-的連接。DEIF LMR-122D
P (External Power) - This green LED is normally ON, indicating that the module is receiving power. If this LED is OFF, it may indicate that theDEIF LMR-122D TCM’s internal fuse is open. ? R (Run) - This green LED is normally ON. When there is an internal module fault, this LED will alternately flash with the red Fault (F) LED. ? F (Fault) - This red LED is normally OFF. This light flashes upon module startup and goes out when the TCM finishes its internal startup routine. When there is an internal module fault, this LED DEIF LMR-122Dwill alternately flash with the green Run (R) LED. ? S (Short) - This red LED is normally OFF. This LED lights when there is a short on one of the output circuits. ? 1 – 8 (Output Status) - These green LEDs normally turn ON and OFF while the module is regulating their outputs. The percentage of time that one of these LEDs is ON verses OFF is representative of the PWM period of that output. Each of the eight LEDs corresponds to an output channel. The output connector is the one on the right side of the module. The channels numbers are labeled on the module next to the connector. For example, LED 8 corresponds to the connections labeled 8+ and 8- on the right-hand connector.DEIF LMR-122D
3.產 品 展 示
4.關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
