YASKAWA JANCD-XCP01C-1電路板
產品詳情資料：
YASKAWA JANCD-XCP01C-1電路板YASKAWA JANCD-XCP01C-1 I/O LINK接口（從）模塊I/O LINK接口模塊（IC693MEM320）在Fanuc CNC（計算機數控）或90-70系列PLC中的Series 90-30 PLC和專有Fanuc I/O LINK之間提供接口。此模塊僅配置為從屬設備（請參閱IC693BEM321了解主應用程序）。Fanuc I/O LINK是一個串行接口，可在主設備和多達16個從設備之間高速交換數據。下圖顯示了Fanuc I/O LINK系統配置中的Series 90-30 PLC的示例。YASKAWA JANCD-XCP01C-1Fanuc輸入/輸出LINK配置中的90-30 PLC示例Series 90-30 I/O LINK接口模塊僅配置為從屬設備，并允許Series 90-30可編程邏輯控制器向I/O LINK發送32或64個I/O點。在安裝過程中，通過將模塊前蓋內的跳線插頭設置為32 I/O或64 I/O，I/O LINK模塊必須配置為32點或64點I/O模塊。
YASKAWA JANCD-XCP01C-1 I/O LINK Interface (Slave) Module The I/O LINK Interface module (IC693BEM320) provides an interface between a Series 90-30 PLC and a proprietary Fanuc I/O LINK in a Fanuc CNC (Computer Numerical Control), or a Series 90-70 PLC. This module is configured as a slave device only (see the IC693BEM321 for master applications). The Fanuc I/O LINK is a serial interface which provides high speed exchange of data between a master and up to 16 slaves. An example of a Series 90-30 PLC in a Fanuc I/O LINK system configuration is shown in the following illustration.Example of a Series 90-30 PLC in a Fanuc I/O LINK Configuration The Series 90-30 I/O LINK Interface module is configured as a slave device only and allows the Series 90-30 PLC to send either 32 or 64 I/O points to the I/O LINK. The I/O LINK module must be configured as either a 32 or 64 point I/O module during installation by setting a jumper plug inside of the front cover of the module to either 32 I/O or 64 I/O.YASKAWA JANCD-XCP01C-1
品牌：YASKAWA
型號：YASKAWA JANCD-XCP01C-1
產品說明：電路板
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
產 品 展 示
關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
