HONEYWELL MN7234A2008減震器執行器
產品詳情資料：
HONEYWELL MN7234A2008減震器執行器APM可以安裝在任何Series 90-30 CPU、擴展或遠程底板中。對于嵌入式CPU（311、313或323），最多可以有三個APM模塊。HONEYWELL MN7234A2008，一個系統中最多可以有八個APM模塊，每個基板最多可以有三個APM。可以使用motion Programmer軟件包創建多個運動程序并將其存儲在APM中（APM中最多可存儲10個）。APM通過VersaPro軟件（1.1版或更高版本）或Logic Developer-PLC進行配置和編程。APM面板（前面板）有兩個24針高密度連接器用于伺服連接。標有A的連接器包含軸1的連接。對于單軸APM，連接器B包含通用連接。對于雙軸APM，連接器B具有用于軸2的連接以及通用連接。為了使驅動器和機器的布線更容易，每個高密度連接器通常通過短電纜連接到接線板。HONEYWELL MN7234A2008
The APM can be installed in any HONEYWELL MN7234A2008, expansion, or remote baseplate. For embedded CPUs (311, 313, or 323), you may have up to three APM modules. For a modular CPU (331 or higher), you may have up to eight APM modules in one system, with a maximum of three APM modules per baseplate. Multiple motion programs may be created and stored in the APM (maximum of 10 may be stored in the APM) with the Motion Programmer software package. The APM is configured and programmed with VersaPro software (Version 1.1 or later) or Logic Developer-PLC.The APM faceplate (front panel) has two 24-pin high-density connectors for servo connections. The connector labeled HONEYWELL MN7234A2008A contains connections for Axis 1. Connector B, for a 1-axis APM, contains general purpose connections. Connector B, for a 2-axis APM, has connections for Axis 2 as well general purpose connections. To make wiring easier to the drive and machine, each high-density connector is typically connected by a short cable to a terminal block.
品牌：HONEYWELL
型號：HONEYWELL MN7234A2008
產品說明：減震器執行器
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
優勢：供應進口原裝正品，專業停產配件。
產 品 展 示
關 于 我 們
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
