HONEYWELL 51400993-100工業鍵盤
產品詳情資料：
HONEYWELL 51400993-100工業鍵盤系統寄存器（僅用于查看參考表；不能在邏輯程序中引用）28字（%SR）定時器/計數器>2000移位寄存器是內置串行端口三個端口。支持SNP/SNPX從設備（在電源連接器上）和RTU從設備、SNP/SPNX主設備/從設備、串行I/O（在端口1和2上）。CCM需要CMM模塊；RTU主支持的PCM模塊。通信LAN-支持多點。還支持以太網、FIP、Profibus、GBC、GCM、GCM+選項模塊。Override Yes Battery Backed Clock Yes Interrupt Support支持周期子例程功能。內存存儲RAM類型和閃存PCM/CCM兼容性是浮點數學支持是的，固件基于固件版本9.0及更高版本。HONEYWELL 51400993-100SNP P1 P2 ON/RUN OFF/RS-232端口1 RS-485端口2型號351 CPU STOP CPU351由Logicmaster 90-30/20/Micro編程和配置軟件6.00版及更高版本以及控制編程和配置程序2.0版及更版本支持。HONEYWELL 51400993-100
HONEYWELL 51400993-100System Registers (for reference table viewing only; cannot be referenced in logic program) 28 words (%SR) Timers/Counters >2,000 Shift Registers Yes Built-in Serial Ports Three ports. Supports SNP/SNPX slave (on power supply connector) and RTU slave, SNP/SNPX master/slave , Serial I/O (on Ports 1 and 2). Requires CMM module for CCM; PCM module for RTU master support. Communications LAN - Supports multidrop. Also supports Ethernet, FIP, Profibus, GBC, GCM, GCM+ option modules. Override Yes Battery Backed Clock Yes Interrupt Support Supports the Periodic Subroutine feature. Type of Memory Storage RAM and Flash PCM/CCM Compatibility Yes Floating Point Math Support Yes, firmware-based in firmware Release 9.0 and later.HONEYWELL 51400993-100SNP P1 P2 ON/RUN OFF/ RS-232 PORT 1 RS-485 PORT 2 Model HONEYWELL 51400993-100STOP The CPU351 is supported by Logicmaster 90-30/20/Micro programming and configuration software Release 6.00 and later releases, and Control programming and configuration software Release 2.0 and later releases.HONEYWELL 51400993-100
品牌：HONEYWELL
型號：HONEYWELL 51400993-100工業鍵盤
產品說明：控制器
特點：模塊/卡件，控制器，觸摸屏，伺服驅動器
產 品 展 示
產 品 展 
公 司 主 營 優 勢
應 用 行 業
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.g2813.cn
