TRICONEX 4000103-510N通信總線
所有到遠程控制器的TCP和UPD連接都是由PC啟動的，也就是說，控制器只在給定的源端口和地址上響應。注意！RobotStudio使用當前的Internet選項、HTTP和代理設置來檢索有關RobotStudio產品和活動的最新公共信息（RobotStudio新聞）。連接到控制器1。確保電腦已連接到控制器的服務端口，并且控制器正在運行。2.在“應用程序”菜單上，指向“聯機”，然后單擊“一鍵連接”。3.在聯機選項卡4中選擇控制器。單擊請求寫入訪問。如果可用，您現在將獲得寫入訪問。手動FlexPendant上的消息框將允許您授予對RobotStudio Online的遠程寫訪問權限。概述本節介紹控制器的用戶授權系統（UAS），該系統限制不同用戶對機器人的操作。這是為了保護數據和功能免受未經授權的使用。
All TCP and UPD connections to remote controllers are initiated by the PC, that is the
controller only responds on the given source port and address.NOTE!
RobotStudio uses the current Internet Options, HTTP, and proxy settings to retrieve latest
public information on the Robotics products and activities (RobotStudio News).
Connecting to the controller
1. Make sure the PC is connected to the controller's service port and that the controller is
running.
2. On the Application menu, point to Online and then click One Click Connect.
3. Select the controller in the Online tab
4. Click Request Write access.Auto You will now get Write Access if it is available.
Manual A message box on the FlexPendant will allow you to grant
remote Write Access to RobotStudio Online.Overview
This section describes the controller's User Authorization System (UAS), which restricts
what different users are allowed to do with the robot. This is for protecting data and
functionality from unauthorized use.
