WOODWARD 5501-467數字速度傳感器
確保要連接的電腦上的網絡設置正確。根據運行的操作系統，請參閱電腦的系統文檔。PC必須設置為“自動獲取IP地址”，或按照引導應用程序中的服務PC信息進行設置。2.使用交付的帶RJ45連接器的5類以太網交叉引導電纜。電纜在RobotWare產品盒中交付。3.將引導電纜連接到電腦的網絡端口xx0400000844?A：網絡端口網絡端口的位置可能因電腦型號而異。4.將引導電纜連接到計算機單元上的服務端口。本主題介紹連接到控制器的PC的網絡設置，這是聯機工作的先決條件。您可以通過以下方式通過以太網將PC連接到控制器：?本地網絡連接?服務端口連接?遠程網絡連接
Make sure the network setting on the PC to
be connected is correct.
Refer to the system documentation for
your PC, depending on the operative
system you are running.
The PC must be set to “Obtain an IP
address automatically” or set as described
in Service PC Information in the Boot
Application.
2. Use the delivered category 5 Ethernet
crossover boot cable with RJ45
connectors.
The cable is delivered in the RobotWare
product box.
3. Connect the boot cable to the network port
of your PC.
xx0400000844
? A: network port
The placement of the network port may
vary depending on the PC model.
4. Connect the boot cable to the service port
on the computer unit.This topic describes the network settings for a PC connected to a controller, which is a
prerequisite for working online.
You can connect the PC to the controller through an Ethernet network in the following ways:
? Local network connection
? Service port connection
? Remote network connection
