RELIANCE S-D4012系統模塊
確保連接的瀏覽器設置(例如,控制器地址沒有代理服務器)正常,并且可以從PC訪問控制器。檢查連接服務器上是否啟用了TCP/IP轉發。有關更多信息,請參閱System 800xA Network Configuration(系統800xA網絡配置)手冊(3BSE034463*)中描述的配置。如果一切正常,將顯示登錄窗口。要打開WebServer界面,請確保在Internet Explorer的LAN設置中禁用了自動檢測設置。默認密碼為ac800m。在第一次可能的時候,將其替換為符合組織安全策略的密碼。無法替換默認密碼會使系統容易受到未經授權的訪問。有關建立密碼安全方案的建議,請參閱System 800xA Administration and Security(3BSE037410*)中的密碼安全主題。
Make sure that the browser settings
for the connection (for example no proxy server for the controller address) is OK
and that the controller is accessible from the PC. Check that TCP/IP forwarding is
enabled on Connectivity Servers.
For more information see the configurations described in System 800xA Network
Configuration manual (3BSE034463*). If everything is correct, the login window
appears.
To open the WebServer interface, ensure that Automatically detect settings is
disabled in the LAN settings of the Internet Explorer.The default password is ac800m. Replace this with a password that conforms
with your organization's security policy at the first possible opportunity. Failure
to replace the default password makes the system susceptible to unauthorized
access.
Refer to the Password Security topic in System 800xA Administration and
Security (3BSE037410*) for recommendations on establishing a password
security scheme.