HIMA LM002_MAX 985020002模塊框架
被另一個主機從環中取出，檢查系統配置警告事件低PROFIBUS上的另一個主設備已禁用CI854/CI854A。檢查系統配置。致命介質訪問錯誤警告事件低PROFIBUS的下層無法訪問介質。檢查CI854/CI854A（電纜、接頭）的連接。這也可能是CI854/CI854A本身的硬件故障。4 16#0000001 0致命硬件錯誤警告事件低檢測到致命硬件錯誤。更換CI854/CI854A。5 16#0000002 0所有從設備故障報警介質檢查PROFIBUS連接（電纜、CI854/CI854A處的連接器）。原因也可能是CI854/CI854A的硬件錯誤。如果使用冗余CI854A，則此錯誤會導致冗余切換。
Taken out of ring
by another
master, check
system conf.
Warnin
g
Event Low Another master on the PROFIBUS
has disabled the CI854/CI854A.
Check the system configuration.Fatal medium
access error
Warnin
g
Event Low The lower layer of the PROFIBUS
cannot access the medium. Check
the connection of the
CI854/CI854A (cable, connectors).
This can also be a hardware
failure on the CI854/CI854A itself.
4 16#0000001
0
Fatal hardware
error
Warnin
g
Event Low A fatal hardware error has been
detected. Replace the
CI854/CI854A.
5 16#0000002
0
All slaves failed Warnin
g
Alarm Mediu
m
Check the PROFIBUS
connections (cable, connector at
the CI854/CI854A). The reason
can also be a hardware error of
the CI854/CI854A. If the CI854A is
used redundant, this error leads to
a redundancy switchover.
