BENTLY 3500/40-01-00位移模塊
標記為保留的電路板故障開關可能具有與生產相關的功能，如果其設置更改，則可能導致電路板故障。不要更改標記為保留的開關的設置。在安裝電路板之前，必須檢查和更改未標記為保留的開關的設置。安裝數據丟失在操作系統或板上運行的其他軟件正確關閉之前關閉或移除板可能會導致數據或文件系統損壞。在從板上卸下電源或從機箱中卸下板之前，請確保所有軟件都已完全關閉。產品損壞僅使用注射器手柄插入電路板，以避免損壞前面板和/或PCB。前面板變形可能導致電氣短路或其他電路板故障。產品損壞在通電的情況下插入或移除模塊可能會損壞模塊組件。在安裝或刪除其他設備或模塊之前，請閱讀產品附帶的文檔
Board Malfunction Switches marked as reserved might carry production-related functions and can cause the board to malfunction if their setting is changed. Do not change settings of switches marked as reserved. The setting of switches which are not marked as reserved has to be checked and changed before board installation. Installation Data Loss Powering down or removing a board before the operating system or other software running on the board has been properly shut down may cause corruption of data or file systems. Make sure all software is completely shut down before removing power from the board or removing the board from the chassis. Product Damage Only use injector handles for board insertion to avoid damage to the front panel and/or PCB. Deformation of the front panel can cause an electrical short or other board malfunction. Product Damage Inserting or removing modules with power applied may result in damage to module components. Before installing or removing additional devices or modules, read the documentation that came with the product
