RELIANCE 45C204A冗余處理器模塊
安裝適當?shù)?255X驅動程序。手動安裝8255X驅動程序如果硬盤上已經安裝了Windows 98 SE，則可能需要手動安裝8255X驅動程序。要安裝驅動程序，請執行以下步驟。1.在計算機上打開“我的電腦”，然后打開“控制面板”。2.雙擊“網絡”圖標。3.從“網絡”菜單中，取消選擇“添加”，然后選擇“適配器”和“添加”。4.將磁盤320-500052-003放入驅動器A.5中。在“復制制造商文件”框中鍵入A:\，然后選擇“確定”。6.選擇“基于8255X的PCI以太網適配器”，并按照屏幕上的說明進行安裝。Windows NT（4.0版）Windows NT 4.0包括板載LAN和視頻適配器的驅動程序。需要以下步驟來配置LAN以進行操作。1.按照正常的Windows NT 4.0安裝，直到您到達Windows NT Workstation Setup（Windows NT工作站設置）窗口，該窗口顯示W(wǎng)indows NT Needs To Know This Computer Should Partition On A Network（Windows NT需要知道這臺計算機應如何參與網絡）。2.在“此計算機將參與網絡”旁邊放置一個點。3.在Wired to The Network旁邊打上復選標記，然后單擊next。4.在下一個屏幕中，單擊“從列表中選擇”按鈕。5.單擊“擁有磁盤”按鈕。
install the appropriate 8255X driver. Manual Installation of the 8255X Driver If Windows 98 SE has already been installed on your hard drive, it may be necessary to manually install the 8255X driver. To install the driver follow the steps below. 1. On your computer open ‘MY COMPUTER’, from there open the ‘CONTROL PANEL’. 2. Double click the ‘NETWORK’ icon. 3. From the ‘NETWORK’ menu, deselect ‘ADD’, then select ‘ADAPTER’ and ‘ADD’. 4. Place disk 320-500052-003 in drive A. 5. Type A:\ in the ‘COPY MANUFACTURER’S FILES FROM’ box, and select “OK”. 6. Select ‘8255X BASED PCI ETHERNET ADAPTER’ and follow the on-screen instructions for installation.Windows NT (Version 4.0) Windows NT 4.0 includes drivers for the on-board LAN, and video adapters. The following steps are required to configure the LAN for operation. 1. Follow the normal Windows NT 4.0 installation until you reach the Windows NT Workstation Setup window which states that Windows NT Needs To Know How This Computer Should Participate On A Network. 2. Place a dot next to This Computer Will Participate On A Network. 3. Place a check mark next to Wired To The Network and click Next. 4. In the next screen, click the Select From List button. 5. Click the Have Disk button.
