RELIANCE 57C430B處理器模塊
這些特性使該裝置非常適合嵌入式應用，尤其是不能使用標準硬盤驅動器和軟盤驅動器的應用。概述VMIVME-7740提供了一個用戶可編程的82C54內部計時器/計數器。82C54提供三個獨立的16位定時器，每個定時器的工作頻率為1或2MHz，由跳線E8的配置決定；參考第32頁表2-2。這些計時器對用戶完全可用，不專用于任何PC/AT功能。這些計時器可用于生成系統中斷。事件可以通過輪詢計時器或通過82C54外部電路生成系統中斷來計時。外部電路由產生中斷的邏輯和指示三個定時器中哪一個產生中斷的定時器中斷狀態寄存器組成。82C54定時器映射在I/O地址$500。計時器使用的中斷是IRQ5。定時器中斷狀態寄存器可通過電源管理I/O地址空間使用。對該空間的訪問在下面的“定時器中斷狀態”部分中進行了說明。
These features make the unit ideal for embedded applications, particularly applications where standard hard drives and floppy disk drives cannot be used.General The VMIVME-7740 provides a user-programmable 82C54 internal timer/counter. The 82C54 provides three independent, 16-bit timers, each operating at 1 or 2 MHz clock speed determined by the configuration of jumper E8; reference Table 2-2 on page 32. These timers are completely available to the user and are not dedicated to any PC/AT function. These timers may be used to generate system interrupts. Events can be timed by either polling the timers or generating a system interrupt via circuity external to the 82C54. The external circuity consists of logic which generates the interrupt and a Timer Interrupt Status register which indicates which of the three Timers generated an interrupt.The 82C54 timers are mapped at I/O address $500. The interrupt used by the Timers is IRQ5. The Timer Interrupt Status register is available via the Power Management I/O address space. The access to this space is explained in the “Timer Interrupt Status” section below.
