RELIANCE 86466-74S整流器組
VMIVME-7740在板上具有可選的閃存磁盤。有關設置的詳細信息，請參閱第4章。7.如果安裝了外部驅動器模塊，則必須運行BIOS設置程序來配置驅動器類型。請參閱附錄C以正確配置系統。如果存在驅動模塊，請根據制造商的說明安裝操作系統。有關在操作系統安裝期間安裝VMIVME-7740外圍驅動程序軟件的說明，請參閱附錄B。BIOS設置VMIVME-7740有一個板載BIOS設置程序，可控制許多配置選項。這些選項保存在一個特殊的非易失性、電池支持的存儲芯片中，統稱為電路板的“CMOS配置”。CMOS配置控制了從通電開始硬件行為的許多細節。VMIVME-7740出廠時未配置CMOS硬盤。必須運行BIOS設置程序來配置連接的特定驅動器。VMIVME-7740 BIOS設置程序的詳細信息包含在附錄C中
The VMIVME-7740 features an optional Flash Disk on the board. Refer to Chapter 4 for set up details. 7. If an external drive module is installed, the BIOS Setup program must be run to configure the drive types. See Appendix C to properly configure the system.f a drive module is present, install the operating system according to the manufacturer’s instructions. See Appendix B for instructions on installing VMIVME-7740 peripheral driver software during operating system installation. BIOS Setup The VMIVME-7740 has an on-board BIOS Setup program that controls many configuration options. These options are saved in a special nonvolatile, battery-backed memory chip and are collectively referred to as the board’s “CMOS configuration.” The CMOS configuration controls many details concerning the behavior of the hardware from the moment power is applied. The VMIVME-7740 is shipped from the factory with no hard drives configured in CMOS. The BIOS Setup program must be run to configure the specific drives attached. Details of the VMIVME-7740 BIOS setup program are included in Appendix C
