ICS TRIPLEX T3120機械備件,工控模塊機器人備件
觸發圖形的光標行1、2或差值（增量）值單擊以手動觸發和捕獲波形DATE/TIME顯示觸發原因觸發原因的日期和時間WAVEFORM繼電器波形數據LEVEL在實線光標行顯示圖形的值CHECK BOX切換復選框以查看所需的圖形按鈕打印、幫助、，保存（將圖形保存到文件）、打開（打開圖形文件）、放大和縮小光標行要移動行，請將鼠標指針移動到光標行上；按住鼠標左鍵并將光標線拖動到新位置GE Multilin 469電機管理繼電器3-15 3用戶接口3.2 469PC軟件接口3 3.2.7相量469PC軟件可用于查看三相電流和電壓的相量圖。相量用于：相電壓A、B和C；相電流A、B和C1。469PC運行并建立通信后，選擇“實際”>“計量數據”菜單項，然后單擊“相量”選項卡，打開“計量數據窗口”。將顯示相量圖、電壓相量值和電流相量值。較長的箭頭表示電壓相量，較短的箭頭表示電流相量。Va和Ia是基準（即零度相位）。滯后角為順時針。圖3-11:PHASORS 3.2.8事件記錄469事件記錄器可通過469PC軟件查看。事件記錄器在每次發生事件（例如，電機跳閘）時存儲電機和系統信息。最多可存儲40個事件，其中EVENT01是最新的，EVENT40是最舊的。每當發生新事件時，EVENT40都會被覆蓋。1.在469PC運行并建立通信后，選擇“實際”>“事件記錄”菜單項以打開“事件記錄窗口”。此窗口顯示事件列表，最新事件顯示在頂部（參見下圖）。2.按查看數據按鈕查看所選事件的詳細信息。3.視圖數據窗口頂部的事件記錄選擇器允許用戶滾動瀏覽不同的事件。4.選擇“保存”將所選事件的詳細信息存儲到文件中。5.選擇“打印”將事件發送到系統打印機，選擇“確定”關閉窗口。事件記錄器的更多信息可在“幫助”下找到。注釋808713A1.CDR電壓電平顯示電壓相量值和角度電流相量短箭頭電壓相量長箭頭電流電平顯示電流相量值值和角度3-16 469電機管理繼電器GE Multilin 3.2 469PC軟件接口3用戶界面3圖3–12:469PC事件記錄器3.2.9故障排除本節提供了一些程序在Windows環境中遇到故障時（例如，通用保護故障（GPF）、丟失窗口、打開/保存文件中的問題和應用程序錯誤消息），對469PC進行故障排除。如果469PC軟件導致Windows系統錯誤：1。檢查系統資源：?在Windows 95/98中，右鍵單擊“我的電腦”圖標，然后單擊“性能”選項卡。
Cursor Lines 1, 2, or Difference (Delta) values for the graph TRIGGER Click to manually trigger and capture waveforms DATE/TIME Displays the date and time of the trigger cause TRIGGER CAUSE Displays the cause of the trigger WAVEFORM The relay waveform data LEVEL Displays the value of the graph at the solid cursor line CHECK BOX Toggle the check boxes to view desired graphs BUTTONS Print, Help, Save (to save graph to a file), Open (to open a graph file), Zoom In and Out CURSOR LINES To move lines, move the mouse pointer over the cursor line; hold the left mouse button and drag the cursor line to a new location GE Multilin 469 Motor Management Relay 3-15 3 USER INTERFACES 3.2 469PC SOFTWARE INTERFACE 3 3.2.7 PHASORS The 469PC software can be used to view the phasor diagram of three phase currents and voltages. The phasors are for: Phase Voltages A, B, and C; Phase Currents A, B, and C. 1. With 469PC running and the communications established, open the Metering Data window by selecting the Actual > Metering Data menu item then clicking the Phasors tab. The phasor diagram and the values of voltage phasors, and current phasors are displayed. Longer arrows are the voltage phasors, shorter arrows are the current phasors. 2. Va and Ia are the references (i.e. zero degree phase). The lagging angle is clockwise. Figure 3–11: PHASORS 3.2.8 EVENT RECORDS The 469 event recorder can be viewed with the 469PC software. The event recorder stores motor and system information each time an event occurs (e.g. motor trip). Up to 40 events can be stored, where EVENT01 is the most recent and EVENT40 is the oldest. EVENT40 is overwritten whenever a new event occurs. 1. With 469PC running and communications established, select the Actual > Event Recording menu item to open the Event Recording window. This window displays the list of events with the most current event displayed on top (see the figure below). 2. Press the View Data button to view the details of selected events. 3. The Event Record Selector at the top of the View Data Window allows the user to scroll through different events. 4. Select Save to store the details of the selected events to a file. 5. Select Print to send the events to the system printer, and OK to close the window. More information for the event recorder can be found under Help. NOTE 808713A1.CDR VOLTAGE LEVEL Displays the value and the angle of the voltage phasors CURRENT PHASOR Short arrow VOLTAGE PHASOR Long arrow CURRENT LEVEL Displays the value and angle of the current phasors 3-16 469 Motor Management Relay GE Multilin 3.2 469PC SOFTWARE INTERFACE 3 USER INTERFACES 3 Figure 3–12: 469PC EVENT RECORDER 3.2.9 TROUBLESHOOTING This section provides some procedures for troubleshooting the 469PC when troubles are encountered within the Windows environment (for example, General Protection Fault (GPF), Missing Window, Problems in Opening/Saving Files, and Application Error messages). If the 469PC software causes Windows system errors: 1. Check system resources: ?In Windows 95/98, right-click on the My Computer icon and click on the Performance tab.
