ICS TRIPLEX T3150A工控模塊備件
t功能菜單。3.469PC顯示以下對話框，顯示數字計數器設置點信息。圖3-5：數字輸入1–數字計數器設定值4。對于需要數值的設定點（例如，報警級別），點擊設定點值框內的任何位置都會啟動一個數字鍵盤，顯示設定點值的舊值、范圍和增量。5.數值設定點值也可以通過在設定點值框末尾滾動向上/向下箭頭來選擇。值相應地遞增和遞減。6.對于需要非數字預設值（例如數字計數器類型）的設定點，點擊設定點值框內的任何位置都會顯示一個下拉選擇菜單。7.對于需要字母數字文本字符串（例如數字計數器名稱）的設定點，將值直接輸入設定點值框。GE Multilin 469電機管理繼電器3-11 3用戶界面3.2 469PC軟件界面3 e）將設定點文件升級為新版本469固件升級后，可能需要升級先前保存的設定點文件的修訂代碼。1.與繼電器建立通信。2.選擇“實際”>“產品信息”菜單項，并記錄繼電器固件的主版本標識符；例如，30D270A8.000，其中270是主版本標識符，指固件版本2.70。3.選擇File（文件）>Open（打開）菜單項，并輸入要下載到所連接繼電器的已保存設定點文件的位置和文件名。當文件打開時，469PC軟件將處于“文件編輯”模式和“不通信”。4.選擇文件>屬性菜單項，并記錄設定點文件的版本代碼。如果設定點文件的版本代碼（例如2.6X）與固件的主版本代碼不同（如步驟1中所示，為270），則使用下拉選項卡顯示可用的版本代碼，并選擇與固件匹配的版本代碼。例如：固件版本：30D270A8.000當前設定點文件版本：2.6X將設定點文件的版本更改為：2.7X圖3–6：設定點文件第5版。選擇文件>保存菜單項以新格式保存設定點文件。6.有關將此設定點文件下載到469的說明，請參閱第c）節：從文件加載設定點。f） 打印設定值和實際值使用以下程序打印設定值列表：1。選擇文件>打開菜單項并打開先前保存的設定點文件，或與469建立通信。2.選擇文件>打印設置菜單項，選擇設置點（全部）或設置點（啟用功能），然后單擊確定。選擇文件>打印菜單項將設定點文件發送到打印機。使用以下步驟打印實際值列表：1。與469建立溝通。2.選擇“文件”>“打印設置”菜單項，選擇“實際值”，然后單擊“確定”。選擇“文件”>“打印”菜單項，將實際值文件發送到打印機。3-12 469電機管理繼電器GE Multilin 3.2 469PC軟件
he Function menu. 3. 469PC displays the following dialog box showing the Digital Counter setpoint information. Figure 3–5: DIGITAL INPUT 1 – DIGITAL COUNTER SETPOINTS 4. For setpoints requiring numerical values (e.g. ALARM LEVEL), clicking anywhere within the setpoint value box launches a numerical keypad showing the old value, range, and increment of the setpoint value. 5. Numerical setpoint values may also be chosen by scrolling with the up/down arrows at the end of the setpoint value box. The values increment and decrement accordingly. 6. For setpoints requiring non-numerical pre-set values (e.g. DIGITAL COUNTER TYPE), clicking anywhere within the setpoint value box displays a drop-down selection menu. 7. For setpoints requiring an alphanumeric text string (e.g. DIGITAL COUNTER NAME), enter the value directly into the setpoint value box. GE Multilin 469 Motor Management Relay 3-11 3 USER INTERFACES 3.2 469PC SOFTWARE INTERFACE 3 e) UPGRADING SETPOINT FILES TO A NEW REVISION It may be necessary to upgrade the revision code for a previously saved setpoint file after the 469 firmware has been upgraded. 1. Establish communications with the relay. 2. Select the Actual > Product Information menu item and record the Main Revision identifier of the relay firmware; for example, 30D270A8.000, where 270 is the Main Revision identifier and refers to firmware version 2.70. 3. Select the File > Open menu item and enter the location and file name of the saved setpoint file to be downloaded to the connected relay. When the file is open, the 469PC software will be in “File Editing” mode and “Not Communicating”. 4. Select the File > Properties menu item and note the version code of the setpoint file. If the version code of the setpoint file (e.g. 2.6X) is different than the Main Revision code of the firmware (as noted in Step 1, as 270), use the pulldown tab to expose the available revision codes and select the one which matches the firmware. For example: Firmware revision: 30D270A8.000 current setpoint file version: 2.6X change setpoint file version to: 2.7X Figure 3–6: SETPOINT FILE VERSION 5. Select the File > Save menu item to save the setpoint file in the new format. 6. See Section c): Loading Setpoints from a File for instructions on downloading this setpoint file to the 469. f) PRINTING SETPOINTS AND ACTUAL VALUES Use the following procedure to print a list of setpoints: 1. Select the File > Open menu item and open a previously saved setpoint file, OR establish communications with the 469. 2. Select the File > Print Setup menu item, select either Setpoints (All) or Setpoints (Enabled Features) and click OK. 3. Select the File > Print menu item to send the setpoint file to a printer. Use the following procedure to print a list of actual values: 1. Establish communications with the 469. 2. Select the File > Print Setup menu item, select Actual Values and click OK. 3. Select the File > Print menu item to send the actual values file to a printer. 3-12 469 Motor Management Relay GE Multilin 3.2 469PC SOFTWARE
