IS220PDIOH1A/IS220PAICH2A系統模塊卡件
外部揚聲器手持設備（例如WSHS 50P-JST）擴展插孔（例如用于EB2E2AHE）IP上行鏈路+PoE OBS關于質量安全和通信的基本信息產品的設計和/或規格可能會因改進而更改，恕不另行通知。錯誤除外。SIP-WS 800P數據表V1.0/0416 IN |2安裝說明–不要將工作站暴露在極端溫度下（參見TE |1上的“技術規范”）。–對于齊平安裝，需要齊平安裝套件WSFB 50P（單獨提供）。–表面安裝，需要表面安裝套件WSSH 50P（獨立提供）。尺寸前面板測量單位為mm（英寸），不按比例！建議安裝高度站的上邊緣距離完工地板約1.65米（5.4英尺）。請根據個人需要調整安裝高度。約1.65 m（5.4 ft）成品地板165（6.5）280（11）深度：13（0.51）空腔壁安裝：15（0.59）(?前面板和墻壁之間的陰影間隙）一個強大的全球網絡COMMEND由當地的COMMED合作伙伴在世界各地代表，并通過定制的內部通信解決方案幫助改善安全和通信。www.commend.com質量測試。可信賴的聰明的COMMAND產品由位于奧地利薩爾茨堡的COMMAND International開發和制造。開發和制造過程根據EN ISO 9001:2015進行認證。本文所含技術數據僅供參考，不具有法律約束力。可能發生技術或其他變更。IoIP?、OpenDuplex?和Commud?是由Commud International GmbH注冊的商標。所有其他品牌或產品名稱均為各自所有者的商標或注冊商標，未明確指定。
External loudspeaker Handset (e.g. WSHS 50P-JST) Expansion jack (e.g. for EB2E2AHE) IP uplink + PoE OBS ESSIVE ABOUT QUAL ITY Security and Communication The design and/or specifications of products may be subject to change for improvement without prior notice. Errors excepted. SIP-WS 800P DATASHEET V1.0/0416 IN | 2 Mounting instructions – Do not expose the station to extreme temperature (see “Technical Specifications“ on TE | 1). – For flush mounting, a flush mount kit WSFB 50P (available separately) is required. – For surface mounting, a surface mount kit WSSH 50P (available separately) is required. Dimensions front panel Measuring units in mm (inch), not to scale! Recommended mounting height The upper edge of the station approx. 1.65 m (5.4 ft) from the finished floor. Please adapt the mounting height to the individual needs. approx. 1.65 m (5.4 ft) Finished floor 165 (6.5) 280 (11) Depth: 13 (0.51) cavity wall mounting: 15 (0.59) (?shadow gap between front panel & wall) A strong worldwide network COMMEND is represented all over the world by local Commend Partners and helps to improve security and communication with tailored Intercom solutions. www.commend.com Quality tested. Reliable. Smart. COMMEND products are developed and manufactured by Commend International in Salzburg, Austria. The development and manufacturing processes are certified in accordance with EN ISO 9001:2015. The technical data contained herein has been provided solely for informational purposes and is not legally binding. Subject to change, technical or otherwise. IoIP?, OpenDuplex? and Commend? are trademarks registered by Commend International GmbH. All other brands or product names are trademarks or registered trademarks of the respective owner and have not been specifically earmarked.
