EMERSON A6110 勵磁系統控制卡
在以下新的或更新的信息中。此列表僅包含實質性更新，并非旨在反映所有更改。翻譯版本并不總是適用于每個版本。說明45MLA光陣列控制器驅動光陣列中的光電元件，這基本上是一系列透射光束對。該控制器有五個版本，每個版本都提供不同的通信平臺，可以選擇與一系列可編程邏輯控制器（PLC）一起工作。控制器包括許多應用程序功能，允許對許多應用程序進行定制。例如，I/O模塊可用于配置多達四個具有獨立輸出和懸垂/超高檢測的獨立感測區。基本模型具有用于離散應用的開/關輸出。模擬輸出模式提供與目標高度、寬度或位置成比例的4…20 mA電流或0…10V輸出。網絡通信模型（RS-485和CAN）可用于通信精確的高度讀數和單個光束狀態。功能?用于45MLA測量燈陣列的外部控制器?高度測量能力?快速反應時間和測量速度?可配置超高和懸垂輸出?模擬模型提供與目標高度、寬度成比例的4…20 mA或0…10V輸出，或位置?基本型號提供用于開/關應用的單個離散輸出?I/O型號功能用于配置具有單獨輸出的四個高度區域的示教按鈕?RS-485和CAN通信型號提供額外功能，包括：-連接到RS-485或CAN網絡（按型號）-詳細的高度信息-單個光束狀態規格主題頁將法語翻譯添加到注意表1將法語翻譯到重要表2型號類別。不模擬模型控制器45MLA-CTRLALG基本模型控制器45MLA-CTRL-BSC I/O模型控制器45ML A-CTRL RS-485控制器45MLA CTRL-485 CAN控制器45MLA-CTRL-CAN環境認證c-UL-us和CE標記適用于所有適用指令操作環境?外殼：IP54?接線板：IP20工作溫度0…55°c（32…131°F）存儲溫度-25…+70°C（-13…+158°F）相對濕度15…95%光學狀態指示器對準、目標存在、輸出、輸入、電源電壓24V DC±15%（20.4…27.6V），最大（2級）紋波=5%電流消耗<300 mA，控制器的最大波束數，輸出未連接傳感器保護EN 61000-4-2、EN 61000-4-4和EN 61000-4-5；短路（SCP）、反極性和過載輸出響應時間參見第2頁上的響應時間輸出類型NPN和PNP（推挽輸出）輸出模式暗操作（當連接為PNP時）輸出電流最大150 mA每種輸入類型下沉或源（跳線可選，默認用于連接至PNP輸出）
ins the following new or updated information. This list includes substantive updates only and is not intended to reflect all changes. Translated versions are not always available for each revision. Description The 45MLA Light Array Controller drives the photoelectric elements in the light arrays, which are essentially a series of transmitted beam pairs. Five versions of the controller are available, each offering a different communications platform that can be selected to function with a range of programmable logic controllers (PLCs). The controller includes numerous application features, which allows for customization to the many applications. For instance, the I/O module can be used to configure up to four separate sensing zones with independent outputs and overhang/over-height detection. The basic model has an on/off output for use in discrete applications. The analog output model offers either a 4…20 mA current or 0…10V output proportional to target height, width, or position. The network communication models (RS-485 and CAN) can be used to communicate precise height readings and individual beam status. Features ? External controller for 45MLA measuring light arrays ? Height measuring capability ? Fast reaction time and measurement speed ? Configurable over-height and overhang outputs ? Analog model offers either 4…20 mA or 0…10V output proportional to target height, width, or position ? Basic models offer single discrete output for use in on/off applications ? I/O model features Teach button for configuring four height zones with individual outputs ? RS-485 and CAN communication models provide extra functionality, including: - Connection to RS-485 or CAN networks (by model) - Detailed height information - Individual beam status Specifications Topic Page Added French translation to Attention table 1 Added French translation to Important table 2 Model Cat. No. Analog Model Controller 45MLA-CTRL-ALG Basic Model Controller 45MLA-CTRL-BSC I/O Model Controller 45MLA-CTRL RS-485 Controller 45MLA-CTRL-485 CAN Controller 45MLA-CTRL-CAN Environmental Certifications c-UL-us and CE Marked for all applicable directives Operating environment ? Housing: IP54 ? Terminal strip: IP20 Operating temperature 0…55 °C (32…131 °F) Storage temperature -25…+70 °C (-13…+158 °F) Relative humidity 15…95% Optical Status indicators Alignment, target present, outputs, inputs, power Electrical Voltage 24V DC ±15% (20.4…27.6V), max (Class 2) ripple = 5% Current consumption <300 mA with maximum number of beams to controller, outputs not connected Sensor protection EN 61000-4-2, EN 61000-4-4, and EN 61000-4-5; short circuit (SCP), reverse polarity, and overload Outputs Response time See Response Time on page 2 Output type NPN and PNP (push-pull output) Output mode Dark operate (when connected as PNP) Output current 150 mA max each Input type Sinking or sourcing (jumper selectable, default is for connection to PNP output)
