8237-1600工控模塊機器人備件
翻譯版本并不總是適用于每個版本。說明45MLA光陣列控制器驅動光陣列中的光電元件，這基本上是一系列透射光束對。該控制器有五個版本，每個版本都提供不同的通信平臺，可以選擇與一系列可編程邏輯控制器（PLC）一起工作。控制器包括許多應用程序功能，允許對許多應用程序進行定制。例如，I/O模塊可用于配置多達四個具有獨立輸出和懸垂/超高檢測的獨立感測區?；灸Ｐ途哂杏糜陔x散應用的開/關輸出。模擬輸出模式提供與目標高度、寬度或位置成比例的4…20 mA電流或0…10V輸出。網絡通信模型（RS-485和CAN）可用于通信精確的高度讀數和單個光束狀態。功能?用于45MLA測量燈陣列的外部控制器?高度測量能力?快速反應時間和測量速度?可配置超高和懸垂輸出?模擬模型提供與目標高度、寬度成比例的4…20 mA或0…10V輸出，或位置?基本型號提供用于開/關應用的單個離散輸出?I/O型號功能用于配置具有單獨輸出的四個高度區域的示教按鈕?RS-485和CAN通信型號提供額外功能，包括：-連接到RS-485或CAN網絡（按型號）-詳細的高度信息-單個光束狀態規格主題頁將法語翻譯添加到注意表1將法語翻譯到重要表2型號類別。
The translated version does not always apply to each version. It shows that the 45MLA optical array controller drives the photoelectric elements in the optical array, which is basically a series of transmitted beam pairs. The controller has five versions, each of which provides a different communication platform and can optionally work with a series of programmable logic controllers (PLCs). The controller includes many application functions, allowing customization of many applications. For example, I/O modules can be used to configure up to four independent sensing areas with independent outputs and overhang/superelevation detection. The basic model has on/off outputs for discrete applications. The analog output mode provides a 4... 20 mA current or a 0... 10V output proportional to the target height, width, or position. Network communication models (RS-485 and CAN) can be used to communicate precise height readings and single beam states. Functions ? External controller for 45MLA measurement lamp array ? Height measurement capability ? Fast response time and measurement speed ? Configurable superelevation and overhang output ? Simulation model provides 4... 20 mA or 0... 10V output proportional to target height and width, Or position ? The basic model provides a single discrete output for on/off applications ? The I/O model function is used to configure teaching buttons for four height zones with separate outputs ? The RS-485 and CAN communication models provide additional functions, including: - Connecting to the RS-485 or CAN network (by model) - Detailed height information - Single beam status specification topic page Add French translation to Note Table 1 Translate French to Important Table 2 Model category.
