TRICONEX 9661-610 DCS工控模塊備件
這可以防止安裝
人員浪費寶貴的時間來確定將每條電線連接到何處。內置配置使用可通過任何瀏覽器訪問的內置配置頁面快速驗證和配置的設置。為了增強安全性一旦配置了并接受了設置則無法再次訪問該網頁。如果出現配置錯誤則可將板重置為出廠默認值并可通過瀏覽器再次訪問網頁。具有防折返功能的控制占用級別支持控制器級別的四個本地區域的占用限制。此功能允許您定義可能有容量限制的特定區域例如禮堂會議室或?qū)嶒炇摇?/p>
配置來限制
允許進入該區域的人數。一旦達到限制將不允許任何其他人員進入定義的位置。這可防止過度擁擠或違反容量規定。低帶寬消耗與類似的實時設備不同僅在發生事件時管理網絡輪詢并與網關通信。通過定期向系統發送心跳信號來確保通信完整性。這種異步通信大大減少了通過網絡管理訪問控制系統所需的帶寬。通信鏈路由監控以增強安全性。如果之間存在通信故障和系統將觸發警報以便立即維修。增加靈活性的監控鎖電源接收至最多安培的監控鎖功率外部電源增加靈活性。
This prevents installation
People waste valuable time determining where to connect each wire. Built in configuration Use the built-in configuration page accessible from any browser to quickly validate and configure settings. For enhanced security, once you have configured and accepted the settings, you cannot access this page again. If a configuration error occurs, the board can be reset to the factory default value and the web page can be accessed again through the browser. The control occupancy level with anti turn back function supports the occupancy limit of four local areas at the controller level. This feature allows you to define specific areas that may have capacity limitations, such as auditorium meeting rooms or laboratories.
Configure to limit
The number of people allowed to enter the area. Once the limit is reached, no other person will be allowed to enter the defined location. This prevents overcrowding or capacity violations. Low bandwidth consumption is different from similar real-time devices only in managing network polling and communicating with the gateway when events occur. Ensure communication integrity by sending heartbeat signals to the system regularly. This asynchronous communication greatly reduces the bandwidth required to manage the access control system through the network. Communication chain routing monitoring to enhance security. If there is a communication failure between and the system will trigger an alarm for immediate repair. The monitoring lock power supply with increased flexibility receives the monitoring lock power with maximum amperage, and the external power supply increases flexibility.
