TRICONEX 9667-810工控模塊
軸油封提供了氟橡膠軸油封套件，您可以在現場安裝在電機上。在電機軸可能偶爾受到油濺或低壓水噴射的應用中使用密封件。例如，當電機暴露于冷卻液噴嘴的飛濺時。重要：軸密封套件必須安裝在電機上，以滿足要求。該套件不適用于電機軸部分或完全浸入油中的應用。重要提示：電機選件具有工廠安裝的軸封，不需要此套件選件！注意：為避免人身傷害或財產損失，當用作駐車制動器時，確保制動器每小時通電斷電次數不超過次。駐車制動器僅用于保持靜止負載，不用于停止電機運動，除非發生電源中斷。有關更多信息，請參閱下表。選項指示符保持扭矩。
通電時的電流消耗輸入制動響應時間增加到電機重量的拾取放下重量增加到發動機慣性的慣性冷電阻歐姆，系列交流伺服電機出版物年月編碼器安裝適配器有幾個適配器可用于將編碼器安裝到伺服電機。重要提示：這些適配器不適用于高分辨率反饋和電機。有關更多信息，請參閱下。重要提示：使用此選項時，防護等級為或的電機將失去額定值。編碼器安裝適配器注意：使用伺服夾具將伺服安裝編碼器安裝到適配器板上。
The shaft oil seal is provided with a fluororubber shaft oil seal kit, which can be installed on the motor in the field. Use seals in applications where the motor shaft may occasionally be subjected to oil splashes or low pressure water jets. For example, when the motor is exposed to the splash of the coolant nozzle. IMPORTANT: The shaft seal kit must be installed on the motor to meet the requirements. This kit is not suitable for applications where the motor shaft is partially or completely immersed in oil. IMPORTANT: The motor option has a factory installed shaft seal, and this kit option is not required! Note: To avoid personal injury or property damage, when used as a parking brake, ensure that the brake is powered on and off no more than times per hour. The parking brake is only used to keep the static load, not to stop the motor movement, unless the power supply is interrupted. Refer to the following table for more information. The option indicator holds the torque.
Current consumption during power on Input braking response time increases to pick up and put down weight of motor increases to inertial cold resistance ohm of engine inertia. Series AC servo motor publications Monthly encoder installation adapters have several adapters that can be used to install the encoder to the servo motor. Important: These adapters are not suitable for high-resolution feedback and motors. For more information, see below. Important: When using this option, motors with degree of protection or will lose their rating. Encoder mounting adapter Note: Use the servo fixture to mount the servo mounting encoder onto the adapter plate.
