TRICONEX 9673-810工控模塊
電機定義
額定運行區域速度轉矩曲線的邊界，其中電機和控制器組合可在伺服基礎上運行，而不超過任何一個的額定值。間歇運行區域速度轉矩曲線的邊界，在該邊界中，電機和控制器組合可以在加速減速模式下運行，但不超過任一模式的峰值額定值，前提是不超過占空比連續轉矩限值。連續電流在額定溫度和環境溫度為時，帶有繞組的電機的額定電流。峰值電流在不損壞電機的情況下施加到電機的電流量。機械時間常數當施加階躍電壓時，電機達到其最終速度的所需的時間。
電氣時間
常數電機達到額定電流所需的時間。最高環境溫度電機可在額定負載下運行而不超過其絕緣型溫升極限的最高環境溫度。絕緣等級電機絕緣材料工作溫度極限的指定。熱時間常數電機繞組達到連續溫升所需的時間，損耗恒定。轉矩常數在規定的電機溫度下，為一安培電機電流產生的轉矩量。扭矩，扭矩加系列，交流伺服電機出版物年月電壓常數當轉子在磁場中機械移動時，以指定速度產生的電壓值。端子電阻繞組電阻。
Motor definition
The boundary of speed torque curve in rated operation area, where the combination of motor and controller can operate on servo basis without exceeding the rated value of any one. The boundary of speed torque curve in intermittent operation area, where the combination of motor and controller can operate in acceleration and deceleration mode without exceeding the peak rating of any mode, provided that the continuous torque limit of duty cycle is not exceeded. The rated current of a motor with windings when the continuous current is at rated temperature and ambient temperature. Peak current The amount of current applied to the motor without damaging the motor. Mechanical time constant The time required for a motor to reach its final speed when a step voltage is applied.
Electrical time
Constant time required for motor to reach rated current. Maximum ambient temperature The maximum ambient temperature at which a motor can operate under rated load without exceeding its insulation type temperature rise limit. Insulation class Designation of operating temperature limits for motor insulation materials. Thermal time constant The time required for the motor winding to achieve continuous temperature rise, with constant loss. The torque constant is the amount of torque produced by one ampere of motor current at the specified motor temperature. Torque, Torque Plus Series, AC Servo Motor Publications Monthly Voltage Constant The voltage value generated at a specified speed when the rotor moves mechanically in a magnetic field. Terminal resistance Winding resistance.
