TRICONEX 9750-310工控模塊備件
提供直角連接器電纜
參見出版物中的《交流伺服電機用電纜》。接線盒允許電機連接器軸向而不是徑向引出至電機，無需進一步接線。重要提示：使用接線盒套件選項時，伺服電機將失去等級。，，伺服電機出版物年月系列伺服電機配置和選項伺服電機電纜伺服電機電纜信息可在伺服電機產品數據出版物中找到。電機安裝螺栓規格請參閱下表，以確定與電機一起使用的正確螺栓類型。為系統選擇高分辨率電機使用以下標準進行選擇：對于需要在啟動時知道軸位置且無需復位的應用，使用多回轉電機。對于需要制動器的應用，使用多匝電機。對于所有其他應用，使用單圈電機。
注：
非電機不適用于高分辨率反饋。接線盒套件用于軸向電纜定向氟橡膠軸油封可選整體制動器電機內部重要提示：使用接線盒套件或反饋安裝套件時，伺服電機不能達到等級可選環境密封包括軸密封可選整體高分辨率或絕對反饋電機內部，代替分解器編碼器二次反饋包反饋安裝套件注：僅用于配有分解器的型號電機螺栓尺寸節距法蘭厚度螺釘長度扭矩。扭矩值為典型值。實際值取決于使用的緊固件材料。
Supply right angle connector cable
See Cables for AC Servo Motors in the publication. The terminal box allows the motor connector to lead out to the motor axially rather than radially without further wiring. Important: When using the terminal box kit option, the servomotor will lose its rating.,, Servo Motor Publications Year Month Series Servo Motor Configurations and Options Servo Motor CablesServo motor cable information can be found in the Servo Motor Product Data publication. Refer to the following table for motor mounting bolt specifications to determine the correct bolt type to use with the motor. High resolution motors are selected for the system using the following criteria: Multi turn motors are used for applications where the shaft position needs to be known at startup and no reset is required. For applications that require brakes, use a multi turn motor. For all other applications, use single coil motors.
Note:
Non motors are not suitable for high-resolution feedback. Junction box kit for axial cable oriented fluororubber shaft oil seal Optional integral brake motor Internal Important: When using the junction box kit or feedback mounting kit, the servo motor cannot reach the grade Optional environmental seals include shaft seals Optional integral high resolution or absolute feedback motor internal, Replace resolver encoder secondary feedback package feedback installation kit Note: only used for models with resolver Motor bolt size Pitch flange thickness Screw length Torque. Torque values are typical. The actual value depends on the fastener material used.
