TRICONEX 9765-210工控DCS系統備件
觸點符合
附錄關于鏡面觸點性能的要求。后視鏡觸點串聯或并聯,必須用作監控觸點,并反饋至安全電路。公元前公元前公元前公元前公元前自動化出版物年月,接觸器極直流操作接觸器額定工作電流開關交流電機的額定值,輔助觸點常規線圈類別。編號電子線圈類別編號如果需要標準的交叉壓印輔助觸點,請在類別中的字母之前刪除字母。。示例:類別。編號變?yōu)椤>幪栔小8鶕?jù)的首選值。觸點符合附錄對鏡面觸點性能的要求。
后視鏡觸點串聯或并聯
必須用作監控觸點,并反饋至安全電路。僅適用于常規直流線圈。拾取繞組必須與遲斷輔助觸點互連。年更高的額定功率僅適用于帶電子線圈的接觸器。型公元前型公元前公元前自動化出版物年月,接觸器線圈電壓代碼安全接觸器。所列編號不完整。從下表中選擇線圈電壓代碼以完成。。類別。編號變?yōu)椤>幪枴=涣麟妷海R?guī)線圈交流電壓,常規線圈交流電壓,電子線圈接口信號電壓。
Contact according to
Appendix Requirements for Mirror Contact Performance. The mirror contacts in series or parallel must be used as monitoring contacts and fed back to the safety circuit. BC BC BC BC BC BC BC BC Automation Publications Year, rated working current of contactor pole DC operated contactor, rated value of switch AC motor, category of auxiliary contact conventional coil. Number Electronic coil category number If you need standard cross imprint auxiliary contact, please delete the letter before the letter in the category.. Example: Category. The number changes to. No. Based on the preferred value of. The contact shall meet the requirements of the appendix for mirror contact performance.
Rearview mirror contacts in series or parallel
It must be used as a monitoring contact and fed back to the safety circuit. Only applicable to conventional DC coils. The pickup winding must be interconnected with the delayed break auxiliary contact. The higher rated power is only applicable to contactors with electronic coils. Type BC Type BC Automation Publications Year BC, Contactor Coil Voltage Code Safety Contactor. The numbers listed are incomplete. Select the coil voltage code from the table below to complete.. Category. The number changes to. Number. AC voltage, conventional coil AC voltage, conventional coil AC voltage, electronic coil interface signal voltage.