VMIVME-1182A-020000工控模塊控制器
螺栓圈
孔，在直徑101.6（4.00）的孔上等距分布3處。螺栓圈。1+0.000/–0.0127（+0.0000/–0.0005）公差。2+0.000/–0.0762（+0.0000/–0.003）公差。3解析器反饋安裝套件中提供的所有安裝硬件。4 Cannon內螺紋連接器CA3102R20–29P或安裝在包裝上的同等產品。Cannon公配合連接器CA3106F–20–295–A95或同等產品。5有關更多信息，請參閱1326AB解析器反饋包產品數據。6（0.38）2（3.62）3 17針連接器5產品數據1326AB AC伺服電機25解析器反饋安裝適配器套件（1326AB MOD Mx）解析器反饋安裝套件提供了將1326AB解析器安裝到B和C系列電機的方法。
A系列電機不需要適配器
使用此選項時，電機的IP 65額定值不會保持不變。圖16 1326AB解析器安裝套件尺寸1326AB–Bxx或Cxx交流伺服電機M22–5.88（149.4）M23–7.63（193.8）1326AB-MOD–M22或1326AB—MOD–M23適配器，用于安裝到1326AB？Bxx或1326AB-Cxx電機，分別（1326AB–Axx電機不需要適配器）0.38（9.7）電機接線盒套件（1326AB-MOD RJxx）電機接線箱套件提供軸向安裝的連接器。連接器版本允許電機連接器軸向引出至電機，無需進一步布線。使用該接線盒時，電機的防護等級保持在IP65。接線盒尺寸如下圖所示。產品數據1326AB交流伺服電機26圖17電機接線盒尺寸尺寸A B C，帶連接器4.13（105.0）2.44（62.0）2.50（190.5）交替位置蓋和墊片C A B鼓風機套件（1326AB-MOD-G3，G4）有兩個鼓風機套件可用于1326AB“C”系列交流伺服電機。“G3”套件專為“C2E”和“C4B”伺服電機設計。
Bolt ring
Holes, 3 equally spaced on 101.6 (4.00) diameter holes. Bolt ring. 1+0.000/– 0.0127 (+0.0000/– 0.0005) tolerance. 2+0.000/– 0.0762 (+0.0000/– 0.003) tolerance. 3 All the installation hardware provided in the parser feedback installation kit. 4 Cannon female connector CA3102R20 – 29P or equivalent installed on the package. Cannon male mating connector CA3106F – 20 – 295 – A95 or equivalent. 5 For more information, see 1326AB parser feedback package product data. 6 (0.38) 2 (3.62) 3 17 pin connector 5 product data 1326AB AC servo motor 25 resolver feedback installation adapter kit (1326AB MOD Mx) The resolver feedback installation kit provides a method for installing the 1326AB resolver to B and C series motors.
A series motors do not require adapters
With this option, the IP 65 rating of the motor does not remain unchanged. Figure 16 1326AB Resolver Mounting Kit Size 1326AB – Bxx or Cxx AC Servo Motor M22 – 5.88 (149.4) M23 – 7.63 (193.8) 1326AB-MOD – M22 or 1326AB – MOD – M23 Adapter for Mounting to 1326AB? Bxx or 1326AB Cxx motors, respectively (1326AB – Axx motors do not require adapters) 0.38 (9.7) motor junction box kit (1326AB MOD RJxx) motor junction box kit provides axial mounted connectors. The connector version allows the motor connector to be axially led out to the motor without further wiring. When the terminal box is used, the protection level of the motor shall be kept at IP65. The size of the junction box is shown in the figure below. Product data 1326AB AC servo motor 26 Figure 17 Motor junction box dimensions A B C, with connector 4.13 (105.0) 2.44 (62.0) 2.50 (190.5) Alternate position cover and gasket C A B Blower kit (1326AB-MOD-G3, G4) There are two blower kits available for 1326AB "C" series AC servo motors. The "G3" kit is designed for "C2E" and "C4B" servomotors.
