VMIVME-3114輸入輸出模塊
全深端銑鍵槽凹形飛邊
軸封提供換向解析器或高分辨率輸出 交流伺服電機15000小時B10軸承壽命–垂直或水平安裝1000 100 2000 4000 500 1000 2000 rpm rpm rpm rpm 4000 rpm rpm rpm 22 1326AB 460V，Torque Plus系列，交流伺服電機出版物1326A-2.9-1999年3月伺服電機選項本節提供了有關1326AB 460 V可用各種選項的詳細信息，扭矩加伺服電機。整體保持制動器（選件-Kxx）當斷電時，盤式制動器為彈簧設置。它的設計目的是將負載保持在靜止狀態為緊急停止提供有限的制動扭矩。制動器不打算用作定位制動器（制動器間隙最大為0.8弧分），也不打算連續循環以幫助停止負載。軸油封（1326AB MOD SSV xxx）Allen Bradley提供了氟橡膠軸油封套件，您可以在現場安裝在電機上。在電機軸可能偶爾受到油濺或低壓水噴射的應用中使用密封件。例如，當電機暴露于冷卻液噴嘴的飛濺時。重要提示：電機上必須安裝軸封套件，以滿足IP65要求。
重要提示：
該套件不適用于電機軸部分或完全浸入油中的應用。重要提示：IP67電機選件（-L）具有工廠安裝的軸封，不需要此套件選件！注意：為避免人身傷害或財產損失，當用作駐車制動器時，確保制動器每小時通電/斷電次數不超過90次。駐車制動器僅用于保持靜止負載，不用于停止電機運動，除非發生電源中斷。有關更多信息，請參閱下表。選項指示符保持扭矩N-m（lb in。)通電時的電流消耗（24V DC輸入）制動響應時間（ms）增加到電機重量的拾取/放下重量kg（lb）增加到發動機慣性的慣性kg-cm-s1（lb in.-s2）冷電阻（歐姆）-K4 8.1（72）0.88A 120/20 1.36（3.0）0.001（0.001）28-K5 13.6（120）1.20A 150/25 4.08（9.0）0.0031（0.0027）21-K7 45.1（400）1.20A 120/30 5.90（13.0）0.0053（0.0046）21 1326AB 460V，Torque Plus系列交流伺服電機23出版物1326A-2.9-1999年3月編碼器安裝適配器（1326AB MOD Mxx）有幾個適配器可用于將Allen-Bradley 845H編碼器安裝到1326AB Torque Plus Series伺服電機。重要提示：這些適配器不適用于高分辨率反饋（-21M和-21S）電機。
Full depth end milling keyway concave flash
Shaft seal provides commutation resolver or high resolution output AC servo motor 15000 hours B10 Bearing life – vertical or horizontal installation 1000 100 2000 4000 500 1000 2000 rpm rpm 4000 rpm rpm 22 1326AB 460V, Torque Plus series, AC servo motor publication 1326A-2.9-1999 Servo motor options This section provides detailed information about the various options available for 1326AB 460V, torque plus servo motor. Integral holding brake (option Kxx) When power is off, the disc brake is spring set. It is designed to keep the load at rest to provide limited braking torque for emergency stop. The brake is not intended to be used as a positioning brake (maximum brake clearance is 0.8 minutes of arc), nor is it intended to circulate continuously to help stop the load. The shaft oil seal (1326AB MOD SSV xxx) Allen Bradley provides a fluoroelastomer shaft oil seal kit that you can install on the motor on site. Use seals in applications where the motor shaft may occasionally be subjected to oil splashes or low pressure water jets. For example, when the motor is exposed to the splash of the coolant nozzle. IMPORTANT: The motor must be fitted with a shaft seal kit to meet IP65 requirements.
Important:
This kit is not suitable for applications where the motor shaft is partially or completely immersed in oil. Important note: IP67 motor option (- L) has factory installed shaft seal, and this kit option is not required! Note: To avoid personal injury or property damage, when used as a parking brake, make sure that the brake is not energized/de energized more than 90 times per hour. The parking brake is only used to keep the static load, not to stop the motor movement, unless the power supply is interrupted. Refer to the following table for more information. Option indicator holds torque N-m (lb in.) Current consumption at power on (24V DC input) Braking response time (ms) increases to pick up/put down weight of motor kg (lb) increases to inertia of engine kg-cm-s1 (lb in. - s2) Cold resistance (ohm) - K4 8.1 (72) 0.88A 120/20 1.36 (3.0) 0.001 (0.001) 28-K5 13.6 (120) 1.20A 150/25 4.08 (9.0) 0.0031 (0.0027) 21-K7 45.1 (400) 1.20A 120/30 5.90 (13.0) 0.0053 (0.0046) 21 1326AB 460V, Torque Plus Series AC Servo Motor 23 Publication 1326A-2.9-1999 March Encoder Mounting Adapter (1326AB MOD Mxx) There are several adapters that can be used to mount Allen Bradley 845H encoders to 1326AB Torque Plus Series servo motors. Important: These adapters are not suitable for high resolution feedback (- 21M and - 21S) motors.
