備件模塊VMIVME-7700RC-111000
擴展電源
設置至（狀態設置為） 擴展電源設為用法 打開以斷開并釋放以供自定義使用 模塊的電源連接/斷開也可以用作電流測量點評估套件硬件 開發板用戶指南––年月日測試點一些測試點已放置在板上用于驗證重要的信號焊料滴上設計了兩個焊料滴用于隔離分配的線路斷開可能性正如前面的一些接口描述中所指出的歐姆電阻器已插入的接收器線路路徑上這些是連接到板上外部驅動器的線歐姆電阻器允許斷開每個電阻器以供自定義使用（例如通過擴展連接器）
多功能性級別
這一特性為用戶提供了一個額外的多功能性級別以便對自己的系統進行原型設計見下表表音頻輸入配置 測試點 測試點名稱零件描述環鉤 環鉤環鉤 環鉤 襯墊 襯墊 襯墊背光驅動器陽極襯墊輔助輸入用于觸摸屏控制器襯墊輔助輸出用于觸摸屏控制器環鉤 環鉤 襯墊可選音頻輸入表焊滴指定默認設置功能打開從共享通道隔離輸出關閉將連接到_通道評估套件硬件開發板用戶指南 斷開可能性指定默認指定
Extended power supply
Set to (Status set to) The extended power supply is set as the usage. Open it to disconnect and release it for custom use. The power connection/disconnection of the module can also be used as the current measurement point evaluation kit. Hardware development board user's guide – – Year Month Day Test points. Some test points have been placed on the board to verify important signal solder drops. Two solder drops are designed to isolate and distribute the circuit disconnection possibility. As indicated in the previous interface description, the ohmic resistor has been These are wire ohmic resistors connected to the external driver on the board on the inserted receiver line path, allowing each resistor to be disconnected for custom use (e.g. via an expansion connector)
Multi functionality level
This feature provides users with an additional level of versatility for prototype design of their own systems. See the following table for audio input configurations. Test point names. Part descriptions. Hook and loop. Hook and loop. Hook and loop. Hook and loop. Hook and loop. Hook and loop. Pad. Backlight driver. Anode pad. Auxiliary input. Used for touch screen controller pad. Auxiliary output. Used for touch screen controller. Hook and loop. Hook and loop. Pad. Optional audio input. Table. Solder drop. Default setting function Turn on Isolate output from shared channel Turn off Connect to_ Channel Assessment Suite Hardware Development Board User Guide Disconnection Possibility Assignment Default Assignment
