控制板 DS200IPCDG1ABA
使用DriveExplorerLite/Full
1.啟動DriveExplorer并使用連接到適配器的驅動器聯機（通過1203-USB或1203-SSS轉換器）。2.在DriveExplorer樹視圖中，單擊20-COMM-M Modbus/TCP適配器，如圖1所示。3.單擊信息圖標以顯示適配器的屬性屏幕。4.“版本：”字段顯示適配器固件的當前版本（例如1.002）。圖1 DriveExplorer窗口中的信息圖標提示：?jiǎn)螕羰褂?.01或更高版本DriveExplorer Lite/Full的20-COMM-M適配器時，適配器固件版本也顯示在DriveExplorer窗格的右側窗格中。第2步第3步第4步4 20-COMM-M Modbus/TCP適配器固件v2.001使用DriveExecutive 1。啟動DriveExceutive并使用連接到適配器的驅動器聯機（通過Modbus/TPC或1203-USB或1203-SSS轉換器）。2.在DriveExecutive樹視圖中，單擊20-COMM-M適配器，如圖2所示。3.單擊信息圖標以顯示適配器的屬性屏幕。4.“版本：”字段顯示適配器固件的當前版本（例如1.002）。
啟動閃存更新后
在下載完成且適配器MOD狀態指示燈開始閃爍綠色之前，請勿斷開驅動器（或20-XCOMM-DC-BASE外部通信套件，如果使用）的電源。如果在此之前斷電，適配器可能會永久損壞。以這種方式損壞的適配器無法修理。20-COMM-M Modbus/TCP適配器固件v2.001 5安裝閃存套件1.從Allen Bradley Web Updates網站安裝20-COMM-M適配器的閃存套件實用程序。（這也會自動安裝最新版本的ControlFLASH實用程序，并在您的計算機上部署用于HyperTerminal的固件文件。）2.您現在可以使用DriveExplorer、DriveExecutive、ControlFLASH或HyperTermination來更新適配器。請參閱下面的相應章節并按照說明進行操作。
Using DriveExplorerLite/Full
1. Start DriveExplorer and use the drive connected to the adapter to go online (via the 1203-USB or 1203-SSS converter). 2. In the DriveExplorer tree view, click 20-COMM-M Modbus/TCP adapter, as shown in Figure 1. 3. Click the Info icon to display the Properties screen for the adapter. 4. The "Version:" field displays the current version of the adapter firmware (for example, 1.002). Figure 1 Information icon prompt in the DriveExplorer window: When you click the 20-COMM-M adapter using DriveExplorer Live/Full version 5.01 or later, the adapter firmware version is also displayed in the right pane of the DriveExplorer pane. Step 2 Step 3 Step 4 20-COMM-M Modbus/TCP adapter firmware v2.001 uses DriveExecutive 1. Start DriveExclusive and go online using the drive connected to the adapter (via Modbus/TPC or 1203-USB or 1203-SSS converters). 2. In the DriveExecutive tree view, click the 20-COMM-M adapter, as shown in Figure 2. 3. Click the Info icon to display the Properties screen for the adapter. 4. The "Version:" field displays the current version of the adapter firmware (for example, 1.002).
After starting the flash update
Do not disconnect the power supply of the drive (or 20-XCOMM-DC-BASE external communication kit, if used) until the download is complete and the adapter MOD status indicator starts flashing green. If power is lost before this, the adapter may be permanently damaged. An adapter that is damaged in this way cannot be repaired. 20-COMM-M Modbus/TCP adapter firmware v2.001 5 Install the flash kit 1. Install the flash kit utility for the 20-COMM-M adapter from the Allen Bradley Web Updates website. (This will also automatically install the latest version of ControlFLASH utility and deploy the firmware file for HyperTerminal on your computer.) 2. You can now use DriveExplorer, DriveExecutive, ControlFLASH or HyperTermination to update the adapter. Refer to the appropriate sections below and follow the instructions.
