勵磁系統控制卡 IS200ERDDH1A
適配器固件版本
1.啟動DriveExplorer并使用連接到適配器的驅動器聯機（僅使用DriveExplorer Full或1203-USB或1203-SSS轉換器通過EtherNet/IP）。2.在DriveExplorer樹視圖中，單擊20-COMM-E EtherNet/IP適配器，單擊信息圖標以顯示適配器的屬性屏幕。4.“版本：”字段顯示適配器固件的當前版本（例如4.002）。圖1-DriveExplorer窗口提示中的信息圖標單擊使用5.01或更高版本DriveExplorer Lite/Full的20-COMM-E適配器時，適配器固件版本也顯示在DriveExplorer窗格的右側窗格中。步驟2步驟3步驟4自動化出版物20COME-RN003A-EN-P-2012年5月4 20-COMM-E EtherNet/IP適配器固件版本4.002使用DriveExecutive 1。啟動DriveExicutive并使用連接到適配器的驅動器聯機（通過EtherNet/IP或1203-USB或1203-SSS轉換器）。2.在DriveExecutive樹狀視圖中，單擊20-COMM-E適配器
單擊信息圖標
顯示適配器的屬性屏幕。.“版本：”字段顯示適配器固件的當前版本固件中的信息圖標閃爍本節描述了閃存升級適配器固件的步驟。Allen Bradley網站更新提供了驅動器和通信適配器的閃存套件，網址為http://www.ab.com/support/abdrives/webupdate.可以通過EtherNet/IP或1203-USB或1203-SSS轉換器使用驅動器軟件工具執行閃存。有關如何連接到硬盤的信息，請參閱1203-USB或1203-SSS用戶手冊。可在文獻庫網站上查看/下載，網址為存在永久性設備損壞的風險。啟動閃存更新后，在下載完成且適配器MOD狀態指示燈開始閃爍綠色之前，請勿斷開驅動器（或20-XCOMM-DC-BASE外部通信套件，如果使用）的電源。
Adapter Firmware Version
1. Start DriveExplorer and use the drive connected to the adapter to go online (only use DriveExplorer Full or 1203-USB or 1203-SSS converter through EtherNet/IP). 2. In the DriveExplorer tree view, click the 20-COMM-E EtherNet/IP adapter, and click the information icon to display the adapter's properties screen. 4. The "Version:" field displays the current version of the adapter firmware (for example, 4.002). Figure 1 - When you click the information icon in the DriveExplorer window prompt to use the 20-COMM-E adapter with DriveExplorer Live/Full version 5.01 or later, the adapter firmware version is also displayed in the right pane of the DriveExplorer pane. Step 2 Step 3 Step 4 Automation publication 20COME-RN003A-EN-P-2012 May 4 20-COMM-E EtherNet/IP adapter firmware version 4.002 Use DriveExecutive 1. Start DriveExecutive and go online using the drive connected to the adapter (via EtherNet/IP or 1203-USB or 1203-SSS converters). 2. In the DriveExecutive tree view, click 20-COMM-E adapter
Click the information icon
The Properties screen for the adapter is displayed The "Version:" field displays the information icon flashing in the current version firmware of the adapter firmware This section describes the steps to flash upgrade the adapter firmware. The Allen Bradley website update provides flash kits for drives and communication adapters at http://www.ab.com/support/abdrives/webupdate. Flash memory can be performed using the drive software tool via EtherNet/IP or 1203-USB or 1203-SSS converters. For information on how to connect to the hard disk drive, refer to the 1203-USB or 1203-SSS User Manual. It can be viewed/downloaded on the website of the literature library, where there is a risk of permanent equipment damage. After starting the flash update, do not disconnect the power supply of the drive (or 20-XCOMM-DC-BASE external communication kit, if used) until the download is complete and the adapter MOD status indicator starts flashing green.
