DS200KLDBG1ABC DCS工控模塊備件
I/O規范
Experion Series-C I/O規范,EP03-490-520 47版本1.5霍尼韋爾專有2021 12月詳細規范-帶OWD1參數規范的數字輸入開路電壓電源電壓(最大26 VDC)閉合觸點電流7 mA(最大)閉合觸點檢測3.1 mA<I<7 mA開路觸點檢測0.9 mA<I<2.0 mA開路檢測I<0.9 mA事件序列(SOE)的數字輸入分辨率1ms(任何/所有通道)注1有關OWD功能的適當場電阻器配置,請參閱《用戶指南》。詳細規范-無OWD的數字輸入參數規范開路電壓電源電壓(最大26 VDC)閉合觸點電流7 mA(最大)閉合觸點檢測I>3.2 mA斷開觸點檢測I<2.0 mA事件序列(SOE)數字輸入分辨率1ms(任何/所有通道)Experion Series C I/O規范,EP03-490-520 48版本1.5霍尼韋爾專有2021 12月
詳細規范-數字輸出
參數規范每個模塊2最大32個輸出通道(帶或不帶開路檢測)輸出型固態電源,短路保護3負載電流斷開負載電流接通<0.1 mA每個通道最小到0.5 A每個通道最大9 A每個模塊1最大接通電壓24 V(典型),負載電流@0.5 A關閉狀態電壓0德爾塔V? I/O子系統易于安裝和維護。降低資本設備成本減少安裝時間和費用提高生產率提高過程可用性簡介傳統I/O是一種模塊化子系統,在安裝過程中提供靈活性。它被設計為安裝在現場,靠近您的設備。傳統I/O配有功能和現場接線保護鍵,以確保正確的I/O卡始終插入相應的接線板。模塊化、保護密鑰和即插即用功能使DeltaV? 傳統I/O是您的過程控制系統的明智選擇。DeltaV M系列傳統I/O 2022年10月www.emerson。
I/O Specification
Experion Series-C I/O specification, EP03-490-520 47 version 1.5 Honeywell proprietary December 2021 detailed specification - Digital input open circuit voltage power supply voltage (maximum 26 VDC) with OWD1 parameter specification Closed contact current 7 mA (maximum) Closed contact detection 3.1 mA<I<7 mA Open contact detection 0.9 mA<I<2.0 mA Open circuit detection I<0.9 mA Event sequence (SOE) Digital input resolution 1 ms (any/all channels) Note 1 Appropriate field resistor configuration for OWD function, Refer to the User Guide. Detailed specification - specification of digital input parameters without OWD Open circuit voltage Power supply voltage (maximum 26 VDC) Closed contact current 7 mA (maximum) Closed contact detection I>3.2 mA Open contact detection I<2.0 mA Sequence of events (SOE) Digital input resolution 1 ms (any/all channels) Experience Series C I/O specification, EP03-490-520 48 version 1.5 Honeywell proprietary December 2021
Detail Specification - Digital Output
Parameter specification: Each module 2 has a maximum of 32 output channels (with or without open circuit detection), output solid state power supply, short-circuit protection 3, load current disconnection, load current connection<0.1 mA, each channel minimum to 0.5 A, each channel maximum 9 A, each module 1 maximum connection voltage 24 V (typical), load current @ 0.5 A, closing state voltage 0 delta V ? The I/O subsystem is easy to install and maintain. Reduce capital equipment costs Reduce installation time and costs Improve productivity Improve process availability Introduction Traditional I/O is a modular subsystem that provides flexibility during installation. It is designed to be installed on-site, close to your equipment. Traditional I/O is equipped with functional and field wiring protection keys to ensure that the correct I/O card is always plugged into the appropriate terminal block. Modularity, protection keys, and plug and play enable DeltaV ? Traditional I/O is a wise choice for your process control system. DeltaV M Series Traditional I/O October 2022 www.emerson.