IS200DRTDH1A模塊控制器
封閉式I/O卡類型
外殼上清楚地標有封閉式I/O卡類型。所有板卡都有電源和內部錯誤指示燈。八個通道卡具有清晰可見的通道狀態LED。通過精心選擇優質電子元件和使用保形涂層，所有板卡均符合ISA G3腐蝕規范。大多數DI卡上都有脈沖計數器。支持的最大頻率從交流信號的0.1 Hz到24V直流輸入的75或120 Hz不等。對于高達50 KHz的脈沖計數，請使用多功能卡的高速脈沖輸入。DeltaV系統為日志事件和警報提供控制模塊級時間戳。為了獲得更高的事件分辨率，16通道事件序列DI卡可以提供信號驅動事件，每個卡的分辨率為+/-0.25 ms，或每個控制器的分辨率為1 ms。
功能的系統
有關事件序列數據收集和此功能的系統選項的更多信息，請參閱事件序列PDS。DeltaV M系列傳統I/O 2022年10月www.emerson.com/DeltaV 4 I/O卡冗余冗余I/O卡可用于關鍵應用。同一板卡可用于單工或冗余應用。當安裝在兩寬冗余接線板上時，控制器將板卡識別為冗余對。控制器掃描每張卡并確定哪個卡充當活動接口。當檢測到故障時，系統自動切換到備用I/O卡。
Enclosed I/O card type
Enclosed I/O card types are clearly marked on the enclosure. All boards have power and internal error indicators. Eight channel cards have channel status LEDs that are clearly visible. By carefully selecting high-quality electronic components and using conformal coatings, all boards meet ISA G3 corrosion specifications. Most DI cards have pulse counters. The maximum supported frequencies range from 0.1 Hz for AC signals to 75 or 120 Hz for 24V DC inputs. For pulse counting up to 50 KHz, use the high-speed pulse input of the multi-function card. The DeltaV system provides control module level timestamps for logging events and alerts. In order to obtain higher event resolution, 16 channel event sequence DI cards can provide signal driven events, with a resolution of+/-0.25 ms for each card or 1 ms for each controller.
Functional system
For more information about event sequence data collection and system options for this feature, see Event Sequence PDS. DeltaV M Series Traditional I/O October 2022 www.emerson com/DeltaV 4 I/O cards Redundant redundant I/O cards are available for critical applications. The same board can be used for simplex or redundant applications. When installed on two wide redundant terminal blocks, the controller identifies the boards as redundant pairs. The controller scans each card and determines which card acts as the active interface. When a fault is detected, the system automatically switches to the standby I/O card.
