DS200TCEBG1ACD機器人模塊
DeltaV M系列傳統I/O
DI卡規格，8信道，120V AC，信道干觸點數8隔離每個信道在250V AC檢測電平下與系統進行光學隔離，開啟>1.4 mA檢測電平，關閉4.8V DC（>5 mA）檢測電平，關斷（最大。)關閉時的2 mA檢測電平<0.25 mA輸入阻抗5K ohm（近似值）潤濕電壓24V DC通道掃描速率所有16通道的0.25毫秒時間戳精度（僅適用于SOE啟用通道）*0.25毫秒來自同一板卡來自同一控制器的1毫秒本地總線電流（標稱12V DC）75 mA典型值，24V DC隔離時，每張卡的最大現場電路功率為100 mA，75 mA。每個通道與系統進行光學隔離，并在工廠測試為1500V DC。SOE卡的簡化電路和連接圖，16通道，24V DC，干觸點*有關系統功能和事件序列數據收集的更多信息，請參閱事件序列產品數據表。
離散輸出I/O卡DO卡規格
8通道，24V DC，隔離通道數8隔離每個通道與系統和彼此光學隔離，并在工廠測試為1500V DC。輸出范圍2V DC至60V DC輸出額定值1.0 A關閉狀態泄漏每卡最大本地總線電流（標稱12V DC）1.2 mA典型值100 mA，每卡最大現場電路功率150 mA無可配置通道類型輸出離散輸出輸出保持在控制器提交的最后狀態。瞬時輸出輸出在預先配置的時間段（100 ms至100 s）內有效。連續脈沖輸出輸出在預配置的基本時間段（100 ms至100 s）中處于活動狀態。分辨率=5 ms DO卡的簡化電路和連接圖，8通道，24V DC，隔離。DeltaV M系列傳統I/O DO卡規格，8通道，24V DC，高側通道數8隔離每個通道與系統光學隔離，并在工廠測試為1500V DC。
DeltaV M-Series Traditional I/O
DI card specification, 8-channel, 120V AC, 8 channel dry contact points, each channel is optically isolated from the system at 250V AC detection level, turn on>1.4 mA detection level, turn off 4.8V DC (>5 mA) detection level, and turn off (maximum) 2 mA detection level when off<0.25 mA input impedance 5K ohm (approximate value) Wetting voltage 24V DC channel scanning rate 0.25 ms timestamp accuracy of all 16 channels (only applicable to SOE enabled channels) * 0.25 ms local bus current (nominal 12V DC) 75 mA typical value from the same controller of the same board. When 24V DC is isolated, the maximum field circuit power of each card is 100 mA, 75 mA. Each channel is optically isolated from the system and tested at the factory to be 1500V DC. Simplified circuit and connection diagram of SOE card, 16 channels, 24V DC, dry contact * For more information about system functions and event sequence data collection, please refer to the event sequence product data sheet.
Discrete Output I/O Card DO Card Specifications
8 channels, 24V DC, the number of isolation channels is 8, each channel is optically isolated from the system and each other, and tested to be 1500V DC in the factory. Output range 2V DC to 60V DC Output rating 1.0 A Closed state Leakage Maximum local bus current per card (nominal 12V DC) 1.2 mA Typical value 100 mA, Maximum field circuit power per card 150 mA No configurable channel type output Discrete output remains in the last state submitted by the controller. The instantaneous output is valid for a pre configured time period (100 ms to 100 s). The continuous pulse output is active for a pre configured basic time period (100 ms to 100 s). Simplified circuit and connection diagram of DO card with resolution=5 ms, 8-channel, 24V DC, isolated. DeltaV M series traditional I/O DO card specification, 8-channel, 24V DC, number of high side channels 8, each channel is optically isolated from the system, and tested to be 1500V DC in the factory.
