DS200SLCCG3AEG工控備件
配置中
C系列I/O尺寸在幾乎所有配置中，C300控制器和C系列I/O以比現有競爭對手和霍尼韋爾同等產品更小的占地面積提供了有用的、可維護的工藝設備連接。安裝C系列I/O模塊有助于節省總體安裝成本。IOTA大小因應用而異。通常，模擬模塊有16個點，位于非冗余應用的6英寸（152mm）IOTA和冗余應用的12英寸（304mm）IOTA上。離散模塊有32個點，位于非冗余應用的9英寸（228mm）IOTA和冗余應用的12英寸（304mm）IOT上。型號表中描述了特定模塊尺寸的具體信息。3.1.輸入/輸出模塊功能?高級模擬輸入/HART輸入模塊（16pt）–高級模擬輸入模塊支持高級模擬和HART輸入。對于傳統和HART設備，模擬輸入通常為4-20mA DC。HART數據可用于狀態和配置。HART數據，如二級和三級變量，也可用作過程控制變量。有兩種版本可用。?高電平模擬輸入w/o HART（16pt）-高電平模擬輸出模塊支持高電平模擬量輸入。
傳統設備
模擬量輸入通常為4-20mA DC。?模擬輸出/HART輸出模塊（16pt）–模擬輸出模塊支持標準4-20mA DC輸出和HART變送器輸出。有兩種版本可用。?模擬輸出w/o HART（16pt）–模擬輸出模塊支持標準4-20mA DC輸出。?數字輸入24 VDC（32pt）–24V信號的數字輸入感應。有兩種版本可用。?數字輸入高壓（32pt）–110 VAC、220 VAC、125 VDC的數字輸入感應。?數字輸出24 VDC（32 pt）–電流源數字輸出。輸出采用電子短路保護。有兩種版本可用。?繼電器數字輸出（32 pt）–帶NO或NC干觸點的數字輸出。可用于低功率或高功率應用。?溫度多路復用器（64 pt）–提供熱電偶（TC）和電阻溫度裝置（RTD）輸入。多路復用器最多支持四個經現場驗證的PMIO FTA。?溫度多路復用器（64 pt）–提供熱電偶（TC）和電阻溫度裝置（RTD）輸入。多路復用器支持多達四個經現場驗證的PMIO FTA?脈沖輸入（8pt）–提供線性計數、PV生成和用于托管傳輸的四態輸入?通用輸入輸出（32pt）–支持32通道用戶可配置IO。可用選項–模擬輸入、模擬輸出、數字輸入和數字輸出。C系列現場連接器最多可接受12ga AWG/2.5mm絞合線。Experion Series-C輸入/輸出規范，
Configuring
C series I/O size In almost all configurations, the C300 controller and C series I/O provide a useful and maintainable process equipment connection with a smaller footprint than existing competitors and Honeywell's equivalent products. Installing C series I/O modules can help save overall installation costs. IOTA size varies by application. Typically, the analog module has 16 points, located on a 6-inch (152mm) IOTA for non redundant applications and a 12 inch (304mm) IOTA for redundant applications. The discrete module has 32 points, located on a 9-inch (228mm) IOTA for non redundant applications and a 12 inch (304mm) IOT for redundant applications. The model table describes the specific information of the specific module size. 3.1. I/O Module Functions ? Advanced Analog Input/HART Input Module (16pt) – The advanced analog input module supports advanced analog and HART inputs. For conventional and HART devices, the analog input is typically 4-20mA DC. HART data is available for status and configuration. HART data, such as secondary and tertiary variables, can also be used as process control variables. Two versions are available. ? High level analog input w/o HART (16pt) - High level analog output module supports high level analog input.
Traditional equipment
Analog input is usually 4-20mA DC. ? Analog Output/HART Output Module (16pt) – The analog output module supports standard 4-20mA DC output and HART transmitter output. Two versions are available. ? Analog Output w/o HART (16pt) – The analog output module supports standard 4-20mA DC output. ? Digital Input 24 VDC (32pt) – Digital input sensing of 24V signals. Two versions are available. ? Digital Input High Voltage (32pt) – Digital input sensing for 110 VAC, 220 VAC, 125 VDC. ? Digital Output 24 VDC (32 pt) – Current source digital output. The output adopts electronic short circuit protection. Two versions are available. ? Relay Digital Output (32 pt) – Digital output with NO or NC dry contacts. Available for low or high power applications. ? Temperature Multiplexer (64 pt) – Provides thermocouple (TC) and resistance temperature device (RTD) inputs. The multiplexer supports up to four field proven PMIO FTAs. ? Temperature Multiplexer (64 pt) – Provides thermocouple (TC) and resistance temperature device (RTD) inputs. The multiplexer supports up to four field proven PMIO FTA ? Pulse Inputs (8pt) – providing linear counting, PV generation, and quad inputs for managed transmission ? Universal Inputs and Outputs (32pt) – supporting 32 channels of user configurable IO. Available options – Analog Input, Analog Output, Digital Input, and Digital Output. C series field connectors can accept up to 12ga AWG/2.5mm stranded wire. Experion Series-C input/output specifications,
