330854-040-24-05機器人備件
速度傳感器外殼
訂購信息有關國家和產品特定批準的詳細列表，請參閱Bently.com上的批準快速參考指南，文件108M1756。Velomitor壓電速度傳感器330500-AA-BB A：安裝螺紋適配器選項00無適配器01 1/2-20 UNF 02 M8 x 1 03 1/4-28 UNF 04 1/4-20 UNC 05不適用于330500。注意：對于1/4-18 NPT安裝，訂單330525.06 5/8–18 UNF 07 3/8–16 UNC 08 1/2–13 UNC B：機構批準選項00不需要01 CSA/US/C 02 ATEX（歐洲）04多重批準（CSA、ATEX）互連電纜標準電纜長度英尺米（近似值）6 ft 1.8 m 8 ft 2.4 m 10 ft 3.0 m 12 ft 3.6 m 15 ft 4.5 m 17 ft 5.0 m英尺米（大致值）20 ft 6.0 m 25 ft 7.6 m 30 ft 9.0 m 33 ft 10.0 m 50 ft15.2 m 99 ft 30.0 m定制電纜零件號您可以以1.0 ft（305 mm）的增量訂購定制電纜長度，但需額外付費。有些電纜有最小和最大長度。零件號說明在這些零件號中使用“NN”指定要訂購的電纜的長度（英尺）。9571-NN雙芯絞合屏蔽22 AWG電纜，一端帶有兩個插座防潮陰接頭，另一端帶有接線片。與監視器一起使用。不適用于21128速度傳感器外殼。最小長度：2.0英尺（0.6米）最大長度：99英尺（30米）84661-NN雙芯絞合屏蔽22 AWG鎧裝電纜，一端帶有雙插座防潮陰接頭，另一端帶有接線片。
與監視器一起使用
不適用于21128速度傳感器外殼。最小長度：3.0英尺（0.9米）最大長度：96英尺（29米）89477-NN雙導線18 AWG絞合屏蔽電纜，一端帶有直角雙插座插頭，另一端帶有接線片。與監視器和21128速度傳感器外殼一起使用。最小長度：2.0英尺（0.6米）最大長度：99英尺（30米）125065-NN雙導線18 AWG絞合，330500 Velomitor壓電速度傳感器數據表6/11 141632 Rev.N零件號描述屏蔽電纜，一端帶有兩個插座插頭和氟硅橡膠護套，另一端帶有接線片。與監視器一起使用。不適用于21128速度傳感器外殼。最小長度：2.0 ft（0.6 m）最大長度：99 ft（30 m）速度傳感器外殼組件21128-AA-BB A：安裝螺紋選項01無螺紋02 3/4-14 NPT 03 1/2-14 NPT04 1/2-12 BSP B：電纜出口配件選項01 1/2-14 NST插頭02 1/2-14 NFT防爆03 1/2-14NPT防爆帶電纜壓蓋使用21128外殼時，電纜零件號89477-AA是將Velomitor傳感器連接至監視器所必需的。速度傳感器外殼–CENELEC批準的107770-AA-BB該版本是330500 Velomitor傳感器和工廠預裝的21128外殼的組合。它也適用于CENELEC 1區IIC組危險區域應用。A： 安裝螺紋選項01無螺紋02 3/4-14 NPT 03 1/2-14 NPT04 1/2-14 BSP B：電纜出口接頭
Speed sensor housing
Ordering Information For a detailed list of country and product specific approvals, see Bently Quick Reference Guide for Approvals on. com, document 108M1756. Velomitor Piezoelectric Speed Sensor 330500-AA-BB A: Mounting Threaded Adapter Option 00 No Adapter 01 1/2-20 UNF 02 M8 x 1 03 1/4-28 UNF 04 1/4-20 UNC 05 Not available for 330500. NOTE: For 1/4-18 NPT installations, Order 330525.06 5/8 – 18 UNF 07 3/8 – 16 UNC 08 1/2 – 13 UNC B: Agency Approval Option 00 does not require 01 CSA/US/C 02 ATEX (Europe) 04 Multiple Approvals (CSA, ATEX) Interconnect Cable Standard Cable Length ft m (approximate) 6 ft 1.8 m 8 ft 2.4 m 10 ft 3.0 m 12 ft 3.6 m 15 ft 4.5 m 17 ft 5.0 m ft m ft m (approximate) 20 ft 6.0 m 25 ft 7.6 m 30 ft 9.0 m 33 ft 10.0 m 50 ft 15.2 m 99 ft 30.0 m Custom Cable Part NumberYou can order custom cable lengths in 1.0 ft (305 mm) increments at an additional cost. Some cables have minimum and maximum lengths. The part number description uses "NN" in these part numbers to specify the length (in feet) of the cable to order. 9571-NN twisted pair shielded 22 AWG cable with two moisture resistant female sockets at one end and lug at the other end. Used with the monitor. Not applicable to 21128 speed sensor housing. Minimum length: 2.0 feet (0.6 meters) Maximum length: 99 feet (30 meters) 84661-NN dual core twisted shielded 22 AWG armored cable with dual socket moisture-proof female connector at one end and lug at the other end.
Use with Monitor
Not applicable to 21128 speed sensor housing. Minimum length: 3.0 feet (0.9 meters) Maximum length: 96 feet (29 meters) 89477-NN double conductor 18 AWG twisted shielded cable with right angle double socket plug at one end and lug at the other end. Used with monitor and 21128 speed sensor housing. Minimum length: 2.0 feet (0.6 meters) Maximum length: 99 feet (30 meters) 125065-NN double wire 18 AWG stranded, 330500 Velomitor piezoelectric speed sensor data sheet 6/11 141632 Rev. N Part number description Shielded cable with two socket plugs and fluorosilicone rubber sheath at one end and lug at the other end. Used with the monitor. Not applicable to 21128 speed sensor housing. Minimum length: 2.0 ft (0.6 m) Maximum length: 99 ft (30 m) Speed sensor housing assembly 21128-AA-BB A: Installation thread option 01 Unthreaded 02 3/4-14 NPT 03 1/2-14 NPT04 1/2-12 BSP B: Cable outlet fitting option 01 1/2-14 NST plug 02 1/2-14 NFT explosion-proof 03 1/2-14 NPT explosion-proof belt When using 21128 housing for cable gland, the cable part number 89477-AA is necessary to connect the Velomitor sensor to the monitor. Speed Sensor Housing – CENELEC approved 107770-AA-BB This version is a combination of the 330500 Velomitor Sensor and the factory pre installed 21128 housing. It is also suitable for CENELEC Zone 1 Group IIC hazardous area applications. A: Mounting thread option 01 Unthreaded 02 3/4-14 NPT 03 1/2-14 NPT04 1/2-14 BSP B: Cable outlet connector
