安全總結
安全總結在本產品的操作、維護和維修的所有階段，必須遵守以下一般安全預防措施。未遵守這些預防措施或本手冊其他地方的特定警告違反了本產品設計、制造和預期用途的安全標準。VMIC不對客戶未能遵守這些要求承擔任何責任。將系統接地為了將電擊危險降至最低，機箱和系統機柜必須連接到電氣接地。應使用三芯交流電源電纜。電源電纜必須插入經批準的三觸點電源插座，或與三觸點至兩觸點適配器一起使用，接地線（綠色）必須牢固連接到電源插座處的電氣接地（安全接地）。
使用的場地
請勿在爆炸性環境中操作請勿在存在易燃氣體或煙霧的情況下操作系統。在這樣的環境中操作任何電氣系統都會構成明確的安全隱患。遠離帶電電路操作人員不得拆除產品蓋。部件更換和內部調整必須由合格的維護人員進行。請勿更換連接了電源線的部件。在某些情況下，即使拆下電源線，也可能存在危險電壓。為避免受傷，在接觸電源和放電電路之前，務必斷開它們。
Safety Summary
Safety Summary The following general safety precautions must be observed during all phases of the operation, service and repair of this product. Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture and intended use of this product. VMIC assumes no liability for the customer’s failure to comply with these requirements. Ground the System To minimize shock hazard, the chassis and system cabinet must be connected to an electrical ground. A three-conductor AC power cable should be used. The power cable must either be plugged into an approved three-contact electrical outlet or used with a three-contact to two-contact adapter with the grounding wire (green) firmly connected to an electrical ground (safety ground) at the power outlet.
Site used
Do Not Operate in an Explosive Atmosphere Do not operate the system in the presence of flammable gases or fumes. Operation of any electrical system in such an environment constitutes a definite safety hazard. Keep Away from Live Circuits Operating personnel must not remove product covers. Component replacement and internal adjustments must be made by qualified maintenance personnel. Do not replace components with power cable connected. Under certain conditions, dangerous voltages may exist even with the power cable removed. To avoid injuries, always disconnect power and discharge circuits before touching them.
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃氣發電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
