產品詳情介紹
ALSTOM V4555724-0100脈沖卡件
連接器保護器。包裝包含10對連接器保護器，用于3300 XL 8 mm探針和延長電纜。如果您的應用需要與安裝位置進行額外的電氣隔離（如某些發電機和電機軸承位置），我們建議使用酚醛螺紋安裝支架。-01選項包括兩個10-24 UNC2A安裝螺釘。-04選項包括兩個M5 x 0.8-6g安裝螺釘。安裝螺釘有預先鉆好的安全線孔。硅膠自熔膠帶。一卷9.1米（10碼）長的硅膠膠帶，用于保護連接器。該膠帶易于安裝，并提供良好的電氣隔離和環境保護。我們不建議在機器外殼內使用此膠帶。40113-02連接器保護器套件。3300 XL 8 mm探針和延長電纜的連接器保護器套件，包括連接器保護器和安裝工具。136536-01連接器保護器適配器。這允許您使用1998年之前生產的連接器保護器安裝工具，以及75ΩClickLoc連接器。75Ω三軸公接頭保護器。公連接器保護器安裝在延長電纜上，并連接到探針上的母連接器保護器，為連接器提供環境保護。母連接器保護器安裝在探針導線上，并連接到延長電纜上的公連接器保護器，為連接器提供環境保護。您還可以將連接器保護器放在延長電纜上，以滑動到前置器傳感器的連接上，保護該連接不受環境影響。
3300 XL ETR連接器套件
用于ETR 3300 XL 8mm探頭和3300 ETR XL延長電纜。包含一對公螺紋和母螺紋ClickLoc連接器、兩個彩色編碼套管、兩條高溫割縫FEP管和一條硅膠帶。163356連接器壓接工具包。包括1套多連接器插件和連接器安裝說明。僅與330153連接器套件或2003年出貨的探頭兼容，或與未安裝ClickLoc連接器的更高版本兼容。提供手提箱。
1.探針頭，直徑8.0 mm（0.31 in），3/8-24螺紋為2.9/16 in，M10螺紋為M17（見注2）3.外殼螺紋為4.5/16 in扳手平面，3/8-二十四螺紋；用于M10螺紋的8mm扳手平面。5.75Ω電纜，最大外徑3.68 mm（0.145 in），F(xiàn)luidLoc電纜最大外徑3.94 mm（0.155 in），鎧裝外徑7.67 mm（0.302 in），護甲套圈最大直徑9.5 mm（0.38 in）6.微型公同軸連接器，最大外徑7.24 mm（0.285 in）“D”7.無螺紋長度“A”8.外殼長度“B”9.最大6.0 mm（0.235 in）10。總長度“C”，+30%，-0%3 75Ω電纜，最大直徑3.68 mm（0.145 in），F(xiàn)luidLoc電纜最大直徑3.94 mm（0.155 in），帶鎧裝的外徑7.67 mm（0.302 in），鎧裝套圈FEP或PFA涂層鎧裝的最大直徑10.2 mm（0.4 in），裝甲長度小于電纜長度300 mm（11.8 in）（見注6）4.75Ω電纜，3.7 mm（0.15 in）最大外徑，F(xiàn)luidLoc電纜的最大直徑為3.94 mm（0.155 in），鎧裝的最大外徑為7.67 mm（0.302 in），護面套圈的最大直徑是10.2 mm（0.40 in）
Connector protectors.
Package contains 10 pairs of connector protectors for 3300 XL 8 mm probes and extension cables. We recommend the phenolic threaded mounting bracket if your application requires additional electric isolation from the mounting location (as in some generator and electrical motor bearing locations). The -01 option includes two 10-24 UNC2A mounting screws. The -04 option includes two M5 x 0.8-6g mounting screws. The mounting screws have pre-drilled holes for safety wire.Silicone self-fusing tape. A 9. 1 - metre (10 -yard) roll of silicone tape to protect connectors. This tape is easy to install and provides excellent electrical isolation and protection from the environment. We do not recommend using this tape inside the casing of the machine. 40113 -02 Connector Protector Kit. Connector Protector Kit for 3300 XL 8 mm probes and extension cables, including connector protectors and installation tools. 136536 -01 Connector protector adapter. This allows you to use connector protector installation tools manufactured prior to 1998 with 75Ω ClickLoc connectors.75Ω triaxial male connector protector. Male connector protectors install onto the extension cable and attach to the female connector protector on the probe, providing environmental protection of connectors.Female connector protectors install onto the probe lead and attach to the male connector protector on the extension cable, providing environmental protection of connectors. You can also place the connector protector onto the extension cable to slide over the connection to the Proximitor sensor to protect that connection from the environment.
3300 XL ETR Connector Kit.
Used on ETR 3300 XL 8mm probes and 3300 ETR XL extension cables. Contains one pair of male and female ClickLoc connectors, two color-coded sleeves, two pieces of high temperature slit FEP tubing, and one strip of silicon tape. 163356 Connector Crimp Tool Kit. Includes 1 set of multiconnector inserts and connector installation instructions. Compatible only with 330153 connector kits or with probes shipped in 2003 or later with ClickLoc connectors uninstalled. Supplied with carrying case.
1. Probe tip, 8.0 mm (0.31 in) diameter 2. 9/16 in for 3/8-24 threads, M17 for M10 threads (see Note 2) 3. Case thread 4. 5/16 in wrench flats for 3/8-24 threads; 8mm wrench flats for M10 threads. 5. 75Ω cable, 3.68 mm (0.145 in) maximum outside diameter, 3.94 mm (0.155 in) maximum outside diameter for FluidLoc cable, 7.67 mm (0.302 in) outside diameter of armor, 9.5 mm (0.38 in) maximum diameter of armor ferrule 6. Miniature male coaxial connector, 7.24 mm (0.285 in) maximum outside diameter “D” 7. Unthreaded length “A” 8. Case length “B” 9. 6.0 mm (0.235 in) maximum 10. Total length “C”, +30%, -0%3 75Ω cable, 3.68 mm (0.145 in) maximum diameter, 3.94 mm (0.155 in) maximum diameter for FluidLoc cable, 7.67 mm (0.302 in) outside diameter with armor, 10.2 mm (0.4 in) maximum diameter for armor ferrule FEP or PFA coated armor, armor length 300 mm (11.8 in) less than cable length (see Note 6) 4. 75Ω cable, 3.7 mm (0.15 in) maximum outside diameter, 3.94 mm (0.155 in) maximum diameter for FluidLoc cable, 7.67 mm (0.302 in) maximum outside diameter of armor, 10.2 mm (0.40 in) maximum diameter of armor ferrule
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
