產品內容介紹
XYCOM 9487-47B1319020000模擬量控制器
使用Datalinks Datalink是PowerFlex驅動器用來在數據之間來回傳輸數據的機制控制器。數據鏈接允許讀取或?qū)懭腧?qū)動器參數值不使用顯式消息。啟用時，每個Datalink占用一個ControlLogix控制器中的32位字。
使用PowerFlex 750系列驅動器Datalinks時，以下規則適用：?Datalink的目標可以是任何主機參數，包括外圍設備例如，驅動器參數535-[Accel Time 1]可以是驅動器中安裝的任何或所有選項模塊的目標。
?通過驅動器Datalink機制傳遞的數據由以下因素決定主機參數01…16-[DL From Net 01-16]和主機的設置參數17…32-[DL To Net 01-16]。
?當包含數據鏈路的I/O連接處于活動狀態時，這些數據鏈路正在使用的被鎖定，并且在該I/O連接之前無法更改變得空閑或不活動。
?當您使用Datalink更改值時，該值不會寫入非易失性存儲（NVS）。該值存儲在易失性存儲器中驅動器斷電時丟失。因此，在需要時使用Datalinks經常更改參數的值。
PowerFlex 750系列驅動器外圍設備的數據鏈路（嵌入式EtherNet/IP僅PowerFlex 755驅動器上的適配器和選項模塊，如編碼器或通信模塊）在外設有I/O連接時被鎖定帶控制器。當控制器與驅動器有I/O連接時，驅動器不允許重置為默認值、配置下載或任何其他可能更改運行系統中I/O連接組成的操作。I/O必須首先禁用與控制器的連接，才能更改各自的數據鏈路。
根據使用的控制器，可以通過以下方式禁用I/O連接執行以下操作：
?禁止RSLogix 5000軟件中的模塊
?將控制器置于程序模式
?將掃描儀置于空閑模式
?斷開驅動器與網絡的連接示例梯形圖邏輯計劃信息
本章各節中的梯形圖邏輯程序示例用于并操作PowerFlex 750系列驅動器。
示例程序的功能
示例程序使您能夠執行以下操作：
?從驅動器接收邏輯狀態信息。
?發送邏輯命令以控制驅動器（例如，啟動、停止）。
?向驅動器發送參考，并從驅動器接收反饋。
?向驅動器發送/接收數據鏈路數據。
邏輯命令/狀態字
這些示例使用邏輯命令字和邏輯狀態字
PowerFlex 750系列驅動器。參見附錄D，邏輯命令/狀態字：PowerFlex 750系列驅動器以查看詳細信息。
Using Datalinks
A Datalink is a mechanism used by PowerFlex drives to transfer data to and from the controller. Datalinks allow a drive parameter value to be read or written to without using an Explicit Message. When enabled, each Datalink occupies one 32-bit word in a ControlLogix controller. The following rules apply when using PowerFlex 750-Series drive Datalinks: ? The target of a Datalink can be any Host parameter, including those of a peripheral. For example, drive parameter 535 - [Accel Time 1] can be the target of any or all option modules installed in the drive. ? The data passed through the drive’s Datalink mechanism is determined by the settings of Host Parameters 01…16 - [DL From Net 01-16] and Host Parameters 17…32 - [DL To Net 01-16]. ? When an I/O connection that includes Datalinks is active, those Datalinks being used are locked and cannot be changed until that I/O connection becomes idle or inactive. ? When you use a Datalink to change a value, the value is NOT written to the Nonvolatile Storage (NVS). The value is stored in volatile memory and lost when the drive loses power. Thus, use Datalinks when you need to change a value of a parameter frequently. Datalinks for PowerFlex 750-Series drive peripherals (embedded EtherNet/IP adapter on PowerFlex 755 drives only and option modules such as an encoder or a communication module) are locked when the peripheral has an I/O connection with a controller. When a controller has an I/O connection to the drive, the drive does not allow a reset to defaults, configuration download or anything else that could change the makeup of the I/O connection in a running system.
Example Ladder Logic Program Information
The example ladder logic programs in the sections of this chapter are intended for and operate PowerFlex 750-Series drives. Functions of the Example Programs The example programs enable you to do the following: ? Receive Logic Status information from the drive. ? Send a Logic Command to control the drive (for example, start, stop). ? Send a Reference to the drive and receive Feedback from the drive. ? Send/receive Datalink data to/from the drive. Logic Command/Status Words These examples use the Logic Command word and Logic Status word for PowerFlex 750-Series drives. See Appendix D, Logic Command/Status Words: PowerFlex 750-Series Drives to view details.The I/O connection with the controller must first be disabled to allow changes to the respective Datalinks. Depending on the controller being used, the I/O connection can be disabled by doing the following: ? Inhibiting the module in RSLogix 5000 software ? Putting the controller in Program mode ? Placing the scanner in idle mode ? Disconnecting the drive from the network
公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
