產品內容介紹
ACUREX 43552-010主控制板連接
ADC和Logix存儲器從RSLogix 5000軟件版本16.00開始，驅動器配置設置已存儲在項目的ACD文件中，該文件下載并存儲在控制器。
支持ADC的設備的配置設置包含其他端口和腳本信息來編排下載過程，因此與中的PowerFlex 750系列驅動器相比，使用了額外的Logix內存RSLogix 5000軟件，版本16.00…19.00系統。
請注意以下示例內存使用：
?PowerFlex 755驅動器，無可選模塊，參數最少更改為默認值，并且沒有DeviceLogix程序消耗每個驅動器大約8.5 KB的Logix內存。
?帶有四個選項模塊的PowerFlex 755驅動器，約50個更改參數，32塊DeviceLogix程序消耗每個驅動器大約有25 KB的Logix內存。大多數Logix控制器都有兆字節的可用內存，因此通常不應該成為問題。
您可以在中監視Logix內存使用情況RSLogix 5000軟件。在控制器屬性對話框中，單擊內存選項卡。
在Logix控制器中存儲驅動器和外圍設備的固件（固件管理器）Logix Firmware Supervisor（Logix固件管理器）功能已擴展為提供固件更新連接到驅動器的外圍設備。
您必須在線并加入控制器加載/存儲固件管理器設置的程序模式。
配置控制器以檢查和刷新驅動器的正確固件和外圍設備，請執行以下步驟。
1.驗證是否在驅動器和外圍設備中選擇了“完全匹配”鍵控屬性對話框。
a、 單擊常規選項卡以查看驅動器的鍵控。
b、 右鍵單擊驅動器選項卡上的每個外圍設備，然后選擇屬性查看外圍設備的鍵控。
2.驗證每個固件版本的ControlFLASH固件套件應該存儲在控制器中的每個設備都已安裝在運行RSLogix 5000軟件的計算機。
3.驗證CompactFlash或其他存儲卡是否已安裝在控制器。
4.使用RSLogix 5000軟件與程序中的控制器聯機模式
5.如果尚未下載程序，請下載。
6.在樹視圖中，右鍵單擊控制器頂部的控制器文件夾管理器，然后選擇“屬性”。
7.在控制器屬性對話框中，單擊非易失性?xún)?nèi)存選項卡。9.從自動固件更新下拉菜單中，選擇啟用并將文件存儲到圖像。
10.單擊<--Store。
您可能會看到與以下內容相關的兩個不同的繼續確認對話框通信中斷和當前內容的擦除存儲卡。如果確定，請?jiān)谌我粚?duì)話框中單擊“是”。
11.RSLogix 5000軟件將進入脫機狀態，如下所示對話框?qū)⒊霈F(xiàn)。
ADC and Logix Memory
Starting in RSLogix 5000 software, version 16.00, drive configuration settings have been stored in the project's ACD file which is downloaded and stored in the controller. Configuration settings for ADC-capable devices contain additional port and scripting information to choreograph the download process, so additional Logix memory is used compared with PowerFlex 750-Series drives in RSLogix 5000 software, version 16.00…19.00 systems. Note these examples of memory usage: ? A PowerFlex 755 drive with no option modules, minimal parameters changed from defaults, and no DeviceLogix program consumes approximately 8.5 kilobytes of Logix memory per drive. ? A PowerFlex 755 drive with four option modules, approximately 50 changed parameters, and a 32-block DeviceLogix program consumes approximately 25 kilobytes of Logix memory per drive. The majority of Logix controllers have megabytes of memory available, so this typically should not be an issue. You can monitor Logix memory usage in RSLogix 5000 software. From the Controller Properties dialog box, click the Memory tab.
Storing the Drive’s and Peripherals’ Firmware in the Logix Controller
The Logix Firmware Supervisor function has been extended to provide firmware updates for the peripherals connected to the drive. You must be online and in program mode with the controller to load/store the firmware supervisor settings. To configure the controller to check and refresh the correct firmware for the drive and peripherals, perform the following steps. 1. Verify that “Exact Match” keying is selected in the drive’s and peripherals’ properties dialog boxes. a. Click the General tab to view the drive’s keying. b. Right-click each peripheral on the Drive tab and choose Properties to view the peripheral’s keying. 2. Verify that ControlFLASH firmware kits for each revision of firmware for each device that should be stored in the controller have been installed on the computer running RSLogix 5000 software. 3. Verify that a CompactFlash or other storage card has been installed in the controller. 4. Use RSLogix 5000 software to go online with the controller in Program mode. 5. Download your program if you have not done so already. 6. In the treeview, right-click the controller folder at the top of the Controller Organizer and choose Properties. 7. On the Controller Properties dialog box, click the Nonvolatile Memory tab.9. From the Automatic Firmware Update pull-down menu, choose Enable and Store Files to Image. 10. Click <-- Store. You may see two different continue confirmation dialog boxes relating to communication disruptions and erasure of the current contents of the storage card. If okay, click Yes on either dialog box. 11. RSLogix 5000 software will go to the Offline state, and the following dialog box will appear.
公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
