產品內容介紹
SCHENCK AG 018078.07 B6 AVIV700模擬控制卡
?可配置為傳輸的主從或對等層次結構
與控制器或其他PowerFlex 750系列驅動器之間的數據通過使用另一個20-750-ENETR選項模塊或PowerFlex 755驅動器中的嵌入式EtherNet/IP適配器。
?支持“EtherNet/IP網絡上的集成運動”操作（Tap僅適用于PowerFlex 755驅動器，固件版本2.003或后來有關設置“EtherNet/IP網絡上的Integrated Motion”的詳細信息
操作，請參閱EtherNet/IP網絡用戶上的Integrated Motion手冊，出版物MOTION-UM003。
?用戶定義的故障操作，以確定選項模塊及其
連接的主機驅動器響應以下內容：
–I/O消息通信中斷（Comm Flt Action）
–控制器處于空閑模式（空閑飛行動作）
–對等設備通信中斷（對等Flt操作）
–通過PCCC、CIP對驅動器控制進行明確的消息傳遞中斷
注冊對象或CIP程序集對象（消息Flt操作）
?通過參數的名稱或編號訪問參數。
?使用Web瀏覽器查看的網頁，顯示有關選件模塊、其主驅動器以及連接到驅動器的DPI設備。根據所選的操作模式（適配器或抽頭），選項模塊提供了一組具有不同信息的獨特網頁。
?配置電子郵件（僅適用于適配器模式）發送至所需地址當選定的驅動器故障發生和/或被清除時，和/或當選項模塊執行通信或空閑故障操作。
?訪問上的任何PowerFlex驅動器及其連接的外圍設備選項模塊所連接的網絡。
選項模塊操作模式選項模塊可以在適配器模式（默認）或抽頭模式下操作。這個操作模式跳線J4（第19頁圖1中的項目3）用于選擇操作模式。如果缺少跳線，則選項模塊在適配器模式。
適配器模式（默認）在適配器模式下
選項模塊作為EtherNet/IP網絡運行通信模塊。憑借EtherNet/IP嵌入式交換機技術和ENET1和ENET2網絡端口，選項模塊使驅動器能夠在線性或設備級環（DLR）網絡拓撲中使用。使用星號時網絡拓撲，可以使用ENET1或ENET2網絡端口。在里面適配器模式，“EtherNet/IP網絡上的集成運動”功能不受支持。
輕觸模式（僅適用于PowerFlex 755驅動器）在Tap模式下，選項模塊的工作方式類似于網關，功能類似至1783-ETAP模塊。通過將提供的以太網電纜連接到選項模塊的ENET3網絡端口和嵌入式EtherNet/IP
PowerFlex 755驅動器上的適配器端口，選項模塊啟用
PowerFlex 755驅動器將其I/O連接擴展到線性或設備級環（DLR）網絡拓撲。這還支持“EtherNet上的集成運動”/用于的PowerFlex 755驅動器支持IP網絡的功能這些拓撲。
? Master-Slave or Peer-to-Peer hierarchy
that can be configured to transmit data to and from a controller or another PowerFlex 750-Series drive on the network by using another 20-750-ENETR option module or the embedded EtherNet/IP adapter in a PowerFlex 755 drive. ? Supports ‘Integrated Motion on the EtherNet/IP network’ operation (Tap mode only) for only the PowerFlex 755 drive, firmware revision 2.003 or later. For details to set up ‘Integrated Motion on the EtherNet/IP network’ operation, see Integrated Motion on the EtherNet/IP Network User Manual, publication MOTION-UM003. ? User-defined fault actions to determine how the option module and its connected host drive respond to the following: – I/O messaging communication disruptions (Comm Flt Action) – Controllers in Idle mode (Idle Flt Action) – Peer device communication disruptions (Peer Flt Action) – Explicit messaging disruptions for drive control via PCCC, the CIP Register Object or the CIP Assembly object (Msg Flt Action) ? Accessing parameters by their name or their number. ? Web pages, viewed by using a web browser, that show information about the option module, its host drive, and DPI devices connected to the drive. Depending on its selected operating mode (Adapter or Tap), the option module provides a unique set of web pages with different information. ? Configured e-mail messaging (Adapter mode only) to desired addresses when selected drive faults occur and/or are cleared, and/or when the option module takes a communication or idle fault action. ? Access to any PowerFlex drive and its connected peripherals on the network to which the option module is connected.
Option Module Operating Modes
The option module can be operated in Adapter mode (default) or Tap mode. The Operating Mode Jumper J4 (item 3 in Figure 1 on page 19) is used to select the operating mode. If the jumper is missing, the option module operates in the Adapter mode. Adapter Mode (default) In the Adapter mode, the option module operates as an EtherNet/IP network communication module. With its EtherNet/IP embedded switch technology and ENET1 and ENET2 network ports, the option module enables the drive to be used in a linear or device-level ring (DLR) network topology. When using a star network topology, either the ENET1 or ENET2 network port may be used. In Adapter mode, the ‘Integrated Motion on the EtherNet/IP network’ functionality is not supported. Tap Mode (only with PowerFlex 755 drives) In the Tap mode, the option module operates like a gateway and functions similar to the 1783-ETAP module. By connecting the supplied Ethernet cable between the option module’s ENET3 network port and the embedded EtherNet/IP adapter port on the PowerFlex 755 drive, the option module enables the PowerFlex 755 drive to extend its I/O connection to a linear or device-level ring (DLR) network topology. This also enables ‘Integrated Motion on the EtherNet/ IP network’ functionality supported by the PowerFlex 755 drive to be used with these topologies.
公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃氣發電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
