產品內容介紹
140DAO84210輸出模塊
配置錯誤字
配置錯誤字以位圖格式包含客戶端配置錯誤指示。模塊配置錯誤字中的特定位打開（設置至1）以指示各種配置錯誤。配置錯誤字出現在
SIE.STATUS。ClientStatus[x]控制器標記數組。
配置錯誤字中設置為1的位表示以下錯誤。
錯誤組合將導致在錯誤字中設置多個位。
更正配置中的任何無效數據，以便正確操作模塊。值為零（0）在這個字中表示所有位都是清除的，這意味著所有模塊配置參數包含有效值。然而，這并不意味著配置
對用戶應用程序有效。確保每個參數設置正確，符合預期要求應用客戶端命令錯誤查看客戶端命令錯誤有幾種不同的方法。
? 在SIE.STATUS中。CmdErrorList控制器標記數組
? 在ProSoft Configuration Builder Diagnostics的客戶端狀態數據屏幕上
? 在配置的SIE客戶端x指定的模塊數據庫位置
如果命令錯誤指針已啟用，則返回命令錯誤指針。這意味著第一個寄存器引用命令1，依此類推。對于每個有錯誤的命令，模塊會自動設置輪詢延遲參數設置為30秒。這將指示模塊等待30秒，直到它嘗試以再次發出命令。
當客戶端命令Last中的命令被輪詢和執行時，錯誤值
在模塊中為每個命令維護。此錯誤列表可以傳輸?shù)教幚砥鳟a(chǎn)品規格
MVI56E西門子工業以太網客戶端通信模塊允許羅克韋爾
Automation?ControlLogix?可編程自動化控制器（PAC）接口
使用多種西門子工業以太網服務器兼容儀器和設備。多客戶機模塊在控制多個西門子工業以太網上的服務器，最多支持20個客戶端。
MVI56E-SIE包括通過模塊的以太網進行配置和管理端口和CIPconnect?通過ControlNet橋接的技術? 和以太網/IP?網絡。MVI56E-SIE是一個僅用于客戶端的模塊，可在本地或遠程機架上運行。
這創建模塊是為了在控制西門子工業以太網。
? 提供20個客戶端連接，每個連接最多16個命令，用于與多個服務器通信
? 主動從西門子工業以太網設備讀取數據并向其寫入數據，使用西門子工業以太網協議。
? ControlLogix處理器可以編程為使用特殊功能來控制通過從命令中主動選擇要執行的命令列表（命令控制）
Configuration Error Word
The Configuration Error Word contains Client configuration error indications, in a bitmapped format. Specific bits in the module's Configuration Error Word are turned on (set to 1) to indicate various configuration errors. The Configuration Error Word appears in the SIE.STATUS.ClientStatus[x] controller tag array. Bits set to 1 in the Configuration Error Word indicate the following errors.Combinations of errors will result in more than one bit being set in the error word. Correct any invalid data in the configuration for proper module operation. A value of zero (0) in this word indicates all bits are clear, which means that all module configuration parameters contain valid values. However, this does not mean that the configuration is valid for the user application. Make sure each parameter is set correctly for the intended application.
Client Command Errors
There are several different ways to view Client Command Errors. ? In the SIE.STATUS.CmdErrorList controller tag array ? On the Client status data screens in the ProSoft Configuration Builder Diagnostics ? At a module database location specified by the configuration's SIE Client x Command Error Pointer, if the Command Error Pointer is enabled. This means that the first register refers to command 1 and so on.For every command that has an error, the module automatically sets the poll delay parameter to 30 seconds. This instructs the module to wait 30 seconds until it attempts to issue the command again. As the commands in the Client Command Last are polled and executed, an error value is maintained in the module for each command. This error list can be transferred to the processor
Product Specifications
The MVI56E Siemens Industrial Ethernet Client Communication Module allows Rockwell Automation? ControlLogix? Programmable Automation Controllers (PACs) to interface easily with multiple Siemens Industrial Ethernet server-compatible instruments and devices. The multi-Client module improves performance when controlling multiple servers on a Siemens Industrial Ethernet network, by supporting up to 20 Clients. The MVI56E-SIE includes configuration and management through the module’s Ethernet port, and CIPconnect? technology for bridging though ControlNet? and EtherNet/IP? networks.The MVI56E-SIE is a Client-only module that will operate on a local or remote rack. This module was created to improve performance when controlling multiple servers on a Siemens Industrial Ethernet network. ? Offers 20 Client connections with up to 16 commands each to talk to multiple servers ? Actively reads data from and writes data to Siemens Industrial Ethernet devices, using Siemens Industrial Ethernet protocol. ? ControlLogix processor can be programmed to use special functions to control the activity on the Client by actively selecting commands to execute from the command list (Command Control)
公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
公司主營范圍簡介
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃氣發電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件、歐美進口模塊。
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
