公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
產品詳情介紹
D20-PS LFDSC143-4000通用電氣卡件
無法直接訪問通過CS31系統總線從中央單元。這個執行主設備和從設備之間的通信使用輸入和輸出操作數。所有主數據都一致地傳輸?shù)絪lave，并且所有slave數據都被一致傳輸向大師致敬。
從PLC可用于二進制范圍或CS31系統總線的字范圍。傳輸和從設備的接收范圍可以適應應用程序特定要求
系統常數KW 00,10和KW 00,11（另見“系統常數”一章）。
您可以設置：–發送和接收范圍的大小以及
-奴隸的雇傭模式（二進制或單詞范圍）。
默認條件：如果中央單元07 KR 91/07 KT 92/07 KT93/07 KR 31/07 KT 31切換至“從”模式”，它們的行為類似于二進制輸入和輸出模塊當連接到CS31系統總線。
這意味著傳輸和接收范圍在主設備的二進制范圍內。
它們的大小為每個32位（4字節）。對于n=4的從機地址，以下適用于例子：07 KR 91的輸出信號AW 00,00用作slave是所用07 KR 91的輸入信號EW 04,00作為總線主控。
A2.7用作從機的特殊模塊CS31系統總線
機器人耦合器ICBG32L7和ICBG64L7
機器人耦合器ICBG32L7（ICBG64L7）在CS31系統總線類似于二進制輸入/輸出模塊配備16（32）個輸入和16（32”）個輸出。模塊地址可通過DIL設置打開印刷電路板。
DIL開關的含義與插入式底座ECZ，見第A2.3章。8號開關為始終設置為OFF。請注意，設置的模塊地址以及以下地址由機器人耦合器分配ICBG64L7。對于中央用戶程序中的信號名稱單元，請參見機器人耦合器的說明。費斯托閥島/安裝島費斯托閥島和費斯托安裝島在CS31系統總線上的行為類似于二進制輸入和輸出模塊。對于指定數據的范圍，請見第A2.9章。模塊地址通過地址設置位于“現場總線節點”蓋板下方的開關。上部開關用于單位數字，下部開關用于切為十位數。A2.8復雜結構示例，包括地址模塊的分類I/O端子There is no direct access to the inputs and outputs of the
slave central unit via the CS31 system bus. The
communication between master and slave is performed
using input and output operands.
All the master data are consistently transferred to the
slave, and all the slave data are consistently transferred
to the master.
The slave PLC can be used either in the binary range or in
the word range of the CS31 system bus. The transmit and
receive ranges of the slave can be adapted to the
application-specific requirements by means of the two
system constants KW 00,10 and KW 00,11 (see also
chapter ”System constants”).
You can set:
– The size of the transmit and receive ranges and
– the mode of employment of the slave (in the binary or
the word range).
Default condition:
If the central units 07 KR 91 / 07 KT 92 / 07 KT 93 /
07 KR 31 / 07 KT 31 are switched over to the ”slave
mode”, they behave like binary input and output modules
with 32 inputs and 32 outputs when connected to the
CS31 system bus.
This means that the default setting of the transmit and
receive ranges is within the binary range of the master.
Their size is 32 bits each (4 bytes)For the slave address of n = 4 the following applies, for
example:
The output signal AW 00,00 of the 07 KR 91 used as
slave is the input signal EW 04,00 for the 07 KR 91 used
as bus master.
A2.7 Special modules used as slave on the
CS31 system bus
Robot coupler ICBG32L7 and ICBG64L7
The Robot coupler ICBG32L7 (ICBG64L7) behaves on
the CS31 system bus like a binary input/output module
equipped with 16 (32) inputs and 16 (32) outputs.
The module address can be set by means of the DIL
switch on the printed circuit board.
The meaning of the DIL switch is the same as that on the
plug-in base ECZ, see chapter A2.3. Switch No. 8 is
always set to OFF.
Please note that the set module address and also the
following address are assigned by the Robot coupler
ICBG64L7.
For the signal names in the user program of the central
unit, please see the description of the Robot couplers.
Festo valve island/installation island
The Festo valve island and the Festo installation island
behave on the CS31 system bus like binary input and
output modules. For the scope of assigned data, please
see chapter A2.9.
The module addresses are set by means of the address
switches located below the cover of the ”field bus node”.
The upper switch is provided for the unit digit, the lower
switch for the tens digit.
A2.8 Complex structure examples including
addresses
Categorization of the modules with respect to the
I/O terminals
