公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
4：一對一服務
產品詳情介紹
ETHERWAN 973G-1600RPSA-BK差動電壓模塊
中輸入和輸出地址的結構遠程模塊將解釋二進制輸入模塊ICSI 08 D1這里是一個例子。總線主中央單元將輸入信號讀取為操作數。輸入信號的完整地址有以下結構：一些其他模塊可能有或多或少不同的地址設置，請參閱以下章節。上的建議模塊地址CS31系統總線，帶多個遠程模塊和中央單元連接為奴隸標準尋址的目的是–簡化和示意設置CS31系統總線上的地址–簡化診斷和故障排除。標準尋址確保不會出現地址重疊，即使對于更大的模塊數據量。建議：為每個模塊分配特定的模塊地址模塊/每個從屬中央單元，即放棄雙重賦值的可能性二進制和模擬模塊的模塊地址二進制遠程模塊的模塊地址和中央單位：8、10、…、58、60（均為偶數），請參見也包括第A2.6章作為從設備連接的中央單元至CS31系統總線模擬遠程模塊的模塊地址：0…5插入式底座ECZ上的8號地址開關始終設置為OFF（<7）A2.3模塊的地址設置輸入和輸出模塊作為從機連接至CS31系統總線
遠程模塊安裝在插件底座上ECZ公司
此插件底座配有地址開關（DIL開關），用于設置模塊地址。模塊類型、模塊地址和通道號導致使用的可變地址總線主中央單元。設置二進制模塊的地址開關設置模擬情況下的地址開關模塊如果使用模擬模塊，其模塊地址可以設置為0...5當中央單元07 KR 91/07 KT 92/07 KT93用作總線主機。07 KR 91/07 KT 92/07中的模擬表示KT 93是固定的。模擬模塊必須提供值的格式，因此要設置為模擬表示b.對于模擬表示，參見模擬模塊的一般說明（第2卷）。功能
Recommended module addresses on the
CS31 system bus with several remote
modules and central units connected as
slaves
The standard addressing has the purpose of
– simplifying and schematizing the setting of
addresses on the CS31 system bus
– simplifying diagnosis and troubleshooting.
The standard addressing makes sure that there will be no
address overlappings even for modules with a bigger
amount of data.
Recommendation:
Assign a specific module address for each
module/each slave central unit, that means the
giving up the possibility of double assignment of
module addresses by binary and analog modules
Module addresses for binary remote modules and
central units: 8, 10, ..., 58, 60 (all even numbers), see
also chapter A2.6 Central units connected as slaves
to the CS31 system bus
Module addresses for analog remote modules: 0...5
Address switch No. 8 on the plug-in base ECZ always
set to OFF (<7)
A2.3 Address setting for the modules
Input and output modules connected as slaves to the
CS31 system bus
The remote modules are mounted on the plug-in base
ECZ. This plug-in base is equipped with an address
switch (DIL switch) for setting the module address.
The combination of module type, module address and
channel number results in the variable address used by
the bus master central unit.
Setting the address switch for binary modules Setting the address switches in case of analog
modules
If analog modules are used, their module addresses can
be set to
0...5
when the central units 07 KR 91 / 07 KT 92 / 07 KT 93 are
used as bus master.
The analog representation in the 07 KR 91 / 07 KT 92 / 07
KT 93 is fixed. The analog modules have to supply their
values in a suitable form and therefore to be set to the
analog representation b. For the analog representation,
see the general description of the analog modules
(volume 2).
The function
