公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
產品詳情介紹
DANAHER S20360-SRS伺服驅動器
這是進入待機模式前系統需要的電量暫停模式（最大功率關閉）。掛起模式關閉更多系統待機模式以外的設備。僅當節能時，此字段才可由用戶編輯
字段設置為“自定義”。其他節能設置的只讀值為：如上所述。當可編輯時，選項為關閉（默認）、5分鐘、10分鐘和10分鐘，15分鐘、20分鐘、30分鐘、40分鐘和60分鐘。
設備監控按ENTER鍵打開設備監控子菜單，用戶可以在其中設置中斷待機模式和掛起模式的設備。
啟用給定IDE設備時，設備上的活動將中斷待機模式、暫停模式和待機定時器。選項被禁用（默認），并且啟用。注意：如果設備是CD-ROM，并且操作系統不斷輪詢CD-ROM（如Windows 95和Windows 98不支持），啟用此設備上的監控可以防止系統從未進入暫停模式。
注：在XVME-660上，IDE輔助主機連接到緊湊型閃存適配器和IDE輔助從屬設備未連接。
PCI總線監控當該字段啟用時，PCI總線上的活動將中斷待機模式，暫停模式和待機定時器。選項被禁用（默認），并且啟用。
總線利用率閾值 總線百分比閾值
如果啟用PCI總線監控設置，則會顯示這些字段。因為PCI總線是始終處于活動狀態，這些字段允許設置閾值。這些閾值設置指定必須存在多少PCI總線活動才能防止系統進入待機狀態
模式或暫停模式。總線利用率閾值設置是數據數量在256時鐘周期周期內檢測的相位；默認設置為0。總線
百分比閾值是總線利用率閾值的時間百分比必須超過才能重新加載待機定時器，或中斷待機，或暫停模式；默認設置為0。此菜單允許您指定設備的啟動順序。當你給裝置通電時向上，它將嘗試按列出的順序從每個列出的設備啟動。可移動固定驅動器是可以包含多個設備的設備組。這個系統將僅嘗試從組中列出的第一個設備啟動，然后繼續通過引導順序。
要更改組和設備的順序，請使用上下箭頭選擇項目鍵，并使用＜+＞鍵（向上）和＜–＞鍵（向下）在列表中向上或向下移動。組內的設備只能在組內上下移動。
您可以在列出或不列出組中的設備之間切換，方法是選擇分組并按ENTER鍵，然后按CTRL-ENTER鍵查看所有設備組。ATAPI可移動設備，如LS120或Iomega IDE Zip?驅動器，可能出現在任一組下。您可以通過以下方式在組之間移動這些設備：選擇它們并按下＜n＞鍵。
This is the amount of the system needs to be in Standby mode before entering
Suspend Mode (maximum power shutdown). Suspend Mode turns off more system
devices than Standby Mode. This field is user-editable only when the Power Savings
field is set to Customized. Read-only values for other Power Savings settings are
given above. When editable, the choices are Off (default), 5 Minutes, 10 Minutes,
15 Minutes, 20 Minutes, 30 Minutes, 40 Minutes, and 60 Minutes.
Device Monitoring Press ENTER to open the Device Monitoring submenu, where the user can set certain
devices to interrupt Standby Mode and Suspend Mode.
When a given IDE device is Enabled, activity on the device will interrupt Standby
Mode, Suspend Mode, and the standby timer. The choices are Disabled (default) and
Enabled.
Note: If the device is a CD-ROM and the OS constantly polls the CD-ROM (as
Windows 95 and Windows 98 do), enabling monitoring on this device can prevent the
system from ever entering Suspend Mode.
Note: On the XVME-660, the IDE Secondary Master is wired to the Compact Flash
adapter, and the IDE Secondary Slave is not connected.
PCI Bus Monitoring When this field is Enabled, activity on the PCI bus will interrupt Standby Mode,
Suspend Mode, and the standby timer. The choices are Disabled (default) and
Enabled.
Bus Utilization Threshold
Bus Percentage Threshold
These fields appear if the PCI Bus Monitoring setting is Enabled. Since the PCI bus is
always active, these fields allow a threshold to be set. These threshold settings specify
how much PCI bus activity must exist to prevent the system from entering Standby
Mode or Suspend Mode. The Bus Utilization Threshold setting is the number of data
phases detected in a 256 clock cycle period; the default setting is 0. The Bus
Percentage Threshold is the percentage of time that the Bus Utilization Threshold
must be exceeded in order to reload the standby timer, or interrupt Standby or
Suspend Mode; the default setting is 0. This menu allows you to specify the boot order for the unit. When you power the unit
up, it will attempt to boot off of each listed device, in the order listed. The removable
and fixed drives are device groups that may contain more than one device. The
system will only attempt to boot off the first listed device in a group before it continues
through the boot order.
To change the order of groups and devices, select an item with the up and down arrow
keys and move it up or down the list with the <+> key (up) and the <–> key (down).
Devices inside of groups will only move up and down within the group.
You can toggle between listing or not listing the devices in a group by selecting the
group and pressing ENTER, and you can press CTRL-ENTER to view all devices in all
groups. ATAPI removable devices, such as LS120 or Iomega IDE Zip? drives, may
appear under either group. You can move these devices between the groups by
selecting them and pressing the <n> key.
