公司主營產品圖展示
產品優勢
1：國外專業的供貨渠道，具有價格優勢
2：產品質量保證，讓您售后無憂
3：全國快遞包郵
產品詳情介紹
SCHROFF MPS022直流電源供應器
XVME-660定制BIOS的設計旨在超越提供的功能普通PC。此自定義BIOS允許您訪問XVME-660模塊，無需直接與硬件接口。在BIOS設置菜單中導航在啟動期間、內存測試之后和系統加載之前，按F2鍵訪問BIOS設置菜單。啟動后可能需要重復按F2鍵。按＜F2＞鍵輸入設置提示可能會出現（取決于BIOS設置），但會顯示只是簡短的。要選擇項目，請使用箭頭鍵將光標移動到所需的字段，并使用輸入鍵以選擇子菜單（如有）（由三角形符號表示）。然后使用＜+＞和＜-＞鍵或F5和F6鍵選擇該字段的值。命令退出菜單允許您保存新值。
BIOS設置菜單使用顏色編碼。字段為藍色，但當前選定的字段為綠色。用戶可配置字段值在括號中，為黑色。在不同菜單上受用戶影響的值在括號中，為藍色。設置小時（HH）、分鐘（MM）和秒（SS）的實時時鐘。時間是根據24小時軍用時鐘（00:00:00至23:59:59）計算。使用標簽或按ENTER鍵向右移動光標，按SHIFT-TAB鍵向左移動光標。使用數字鍵，0-9來改變字段值。不需要輸入秒或在中鍵入零數字前面。IDE主、次主和從子菜單IDE主、次主和從子菜單用于配置IDE設備信息。如果只有一個設備連接到其中一個IDE適配器，則需要輸入主子菜單中的參數。如果連接了兩個設備：
一個IDE適配器，需要輸入主和從子菜單參數。全部的四個子菜單包含相同的信息。
IDE輔助主機用于緊湊型閃存適配器
IDE次要從屬設備未連接，因此不應使用。
下面的屏幕顯示了所有可能的字段。因此，它不是一個配置它實際上會出現。屏幕上的字段根據在中選擇的選項進行更改鍵入字段。顯示設備類型。選項包括無、IDE可移除、ATAPI可移除，CD-ROM、其他ATAPI、用戶和自動。自動選項使系統自動打字每次啟動時，顯示設置；它不允許您編輯其余字段。
自動選項（默認值）使系統填寫其他字段值。這個用戶選項允許用戶填寫其他字段。其他選項允許用戶：配置其他IDE設備。
The XVME-660 customized BIOS is designed to surpass the functionality provided for
normal PCs. This custom BIOS allows you to access the value-added features on the
XVME-660 module without interfacing to the hardware directly.
Navigating through the BIOS Setup Menus
Press F2 during bootup after the memory tests and before the system loads to access the
BIOS setup menus. You may need to press F2 repeatedly after boot up. A Press <F2>
to enter SETUP prompt may appear (depending on BIOS settings), but will be shown
only briefly. To select an item, use the arrow keys to move the cursor to the field you want and use the
ENTER key to select a submenu, if any (indicated by a triangle bullet, ). Then use the
<+> and <–> keys or the F5 and F6 keys to select a value for that field. The commands in
the Exit menu allow you to save the new values.
The BIOS setup menus use color-coding. The fields are blue, except for the currently selected field, which is green. User-configurable field values are in brackets and are black.
Values that can be affected by the user on a different menu are in brackets and are blue. Sets the real-time clock for hour (HH), minute (MM), and seconds (SS). The hour is
calculated according to the 24 hour military clock (00:00:00 through 23:59:59). Use TAB
or ENTER to move the cursor right, and SHIFT-TAB to move it left. Use the number keys,
0-9, to change the field values. It is not necessary to enter the seconds or type zeros in
front of numbers. IDE Primary and Secondary Master and Slave Submenus
The IDE Primary and Secondary Master and Slave submenus are used to configure IDE
device information. If only one device is attached to one of the IDE adapters, then only
the parameters in the Master Submenu need to be entered. If two devices are connected to
one IDE adapter, both Master and Slave Submenu parameters will need to be entered. All
four submenus contain the same information.
The IDE Secondary Master is used for the Compact Flash adapter. The IDE Secondary
Slave is not connected, and so should not be used.
The screen below shows all possible fields. Because of this, it is not a configuration that
would actually appear. The fields on the screen change based on the option chosen in the
Type field. Displays the type of device. Options include None, IDE Removable, ATAPI Removable,
CD-ROM, Other ATAPI, User, and Auto. The Auto option causes the system to autotype
at each boot and display the settings; it does not allow you to edit the remaining fields.
The Auto option (the default value) causes the system to fill in the other field values. The
User option allows the user to fill in the other fields. The other options allow the user to
configure other IDE devices.
