YOKOGAWA AIP171耦合器單元
Basler數字勵磁控制系統（DECS-100）是一種電子固態微處理器基于控制裝置。DECS-100通過以下方式調節無刷交流發電機的輸出電壓控制進入發電機勵磁機磁場的電流。DECS-100的輸入功率可以來自多極、高頻、永磁發電機（PMG），也可以來自發電機輸出傳統的并聯勵磁勵磁系統。
DECS-100以封裝包裝提供，設計用于面板后安裝。這個DECS-100由螺紋成形螺釘固定在其塑料外殼上。前面板指示器（LED）指示DECS-100狀態和系統狀況。進行DECS-100連接后面板上的四分之一英寸快速連接端子。后部的9針DB-9型連接器面板提供DECS-100和IBM兼容PC之間的通信。
特征DECS-100裝置具有以下特點和功能：
?四種控制模式：自動電壓調節（AVR）、手動或勵磁電流調節（FCR），功率因數（PF）調節和無功功率（var）調節。
?可編程穩定性設置。
?在AVR控制模式下具有可調斜坡的軟啟動和電壓建立控制。
?AVR、Var和PF控制模式中的過勵磁限制（OEL）和欠勵磁限制（UEL）。
?低頻（伏特/赫茲）調節。
AVR模式下的三相或單相發電機電壓（rms）傳感/調節。
?單相母線電壓（rms）傳感。
?單相發電機電流傳感，用于計量和調節。
?磁場電流和磁場電壓傳感。
?一個模擬輸入，用于設定點的比例遠程控制。
系統接口的五個觸點感應輸入
?一個通用輸出繼電器，用于報警指示和跳閘功能。
?三種保護功能：磁場過電壓、發電機過電壓和傳感損失。
?具有無功下垂補償和無功差動補償?shù)陌l(fā)電機并聯。
?后RS-232通信端口，用于使用BESTCOMS進行個人計算機通信基于Windows?的軟件，用于快速、用戶友好的設置和控制。增加的材料覆蓋增加的UEL能力
?修改了所有圖紙，以顯示帶有UEL指示器的新前面板
?更新后面板的所有插圖，以顯示修改后的CT
?增加了對總結點和接管風格OEL限制的討論
?修訂了電壓匹配說明，以涵蓋維護和恢復模式
?修正圖4-2所示的鉆孔直徑
?增加了使用ICRM-7和DECS-100的說明/說明
?刪除了第6節，Palm?OS平臺的BESTCOMS軟件，以及將維護和故障排除移至第6節
?增加了UEL通知的故障排除程序
INTRODUCTION
The Basler Digital Excitation Control System (DECS-100) is an electronic, solid-state, microprocessor
based control device. The DECS-100 regulates the output voltage of a brushless, ac generator by
controlling the current into the generator exciter field. Input power to the DECS-100 can be from a multipole, high-frequency, permanent magnet generator (PMG) or from the generator output when used as a
conventional, shunt-excited, excitation system.
The DECS-100 is supplied in an encapsulated package designed for behind-the-panel mounting. The
DECS-100 is held in place by thread-forming screws that thread into its plastic shell. Front panel
indicators (LEDs) annunciate DECS-100 status and system conditions. DECS-100 connections are made
through quarter-inch, quick-connect terminals on the rear panel. A 9-pin DB-9 type connector on the rear
panel provides communication between the DECS-100 and an IBM compatible PC.
FEATURES
DECS-100 units have the following features and capabilities:
? Four control modes: automatic voltage regulation (AVR), manual or field current regulation (FCR),
power factor (PF) regulation, and reactive power (var) regulation.
? Programmable stability settings.
? Soft start and voltage buildup control with an adjustable ramp in AVR control mode.
? Overexcitation limiting (OEL) and underexcitation limiting (UEL) in AVR, Var, and PF control modes.
? Underfrequency (volts/hertz) regulation.
? Three-phase or single-phase generator voltage (rms) sensing/regulation in AVR mode.
? Single-phase bus voltage (rms) sensing.
? Single-phase generator current sensing for metering and regulation purposes.
? Field current and field voltage sensing.
? One analog input for proportional remote control of the setpoint.
? Five contact sensing inputs for system interface.
? One common output relay for alarm indication and trip functions.
? Three protection functions: field overvoltage, generator overvoltage, and loss of sensing.
? Generator paralleling with reactive droop compensation and reactive differential compensation.
? Rear RS-232 communication port for personal computer communication using BESTCOMS
Windows? based software for fast, user-friendly, setup and control. Added material covering added UEL capability
? Revised all drawings to show new front panel with UEL indicator
? Updated all illustrations of rear panel to show revised CT
? Added discussion of summing point and takeover style OEL limiting
? Revised voltage matching description to cover Maintain and Revert modes
? Corrected the hole drilling diameter shown in Figure 4-2
? Added illustration/description for using the ICRM-7 with the DECS-100
? Removed Section 6, BESTCOMS Software for the Palm? OS Platform and
moved Maintenance and Troubleshooting to Section 6
? Added troubleshooting procedure for a UEL annunciation
