主營產品
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃氣發電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
HONEYWELL 51306673-100控制板卡
National Instruments的模塊化儀器使用適合的專用驅動器每個產品的專業化。Express VIs提供定制的，在單界面和軟前端中的儀器交互編程面板提供用于測試每個儀器功能的接口而不需要編程。NI開關、數字萬用表、高速DIO、高速數字化儀和源都有定制的驅動程序高端模塊化儀表系統。射頻應用杠桿兩個驅動器，NI-RFSG和NI-RFISA和動態信號采集可通過NI DAQmx獲得。您可以擴展PXI系統的定時和觸發功能
使用PXI定時和同步產品。這些產品提供：精密時鐘源，多機箱觸發器的自定義路由
同步、時鐘共享等，并使用NI同步。有關更多信息，請訪問ni.com/pxi。NI-VISA是國家執行VISA的工具規格VISA是用于通信和控制的統一APIUSB、串行、GPIB、PXI、VXI和各種其他類型的儀器。這
API幫助創建便攜式應用程序和儀器驅動程序。對于有關使用NI-VISA編寫自己的PXI儀器驅動程序的信息，
請參閱NI-VISA入門手冊和自述。txt文件
NI-VISA目錄。欲了解更多信息，請訪問ni.com/visa。
使用LabVIEW for Linux，支持超過200臺設備
使用NI DAQmx驅動程序的Linux，您現在可以創建虛擬儀器
基于Linux操作系統。Linux中的儀器控制已通過以下方式得到改進：
Linux和NI模塊化儀器的NI-VISA驅動程序部分：支持。本章包含有關安裝和配置
NI PXI-8105控制器
安裝NI PXI-8105
本節包含NI PXI-8105的一般安裝說明。
有關具體說明，請參閱PXI機箱用戶手冊，以及警告。
1.在安裝NI PXI-8105之前插入機箱。電源電源線將機箱接地，并保護其免受電氣損壞，同時：
安裝模塊。（確保電源開關已關閉。）
注意：為了保護您自己和機箱免受電氣危險，請離開機箱
關閉電源，直到完成NI PXI-8105模塊的安裝。
2.取下任何堵塞系統控制器插槽的填充面板機箱中的（插槽1）。
3.觸摸外殼的金屬部分，以釋放任何靜電可能在你的衣服或身體上。
4.從四個支架固定件上拆下保護塑料蓋螺釘如圖2-1所示。
National Instruments’ Modular Instruments use specialized drivers suited
to each product’s specialization. Express VIs provide customized,
interactive programming of instruments in a single interface and soft front
panels provide an interface for testing the functionality of each instrument
with no programming required. NI Switches, DMMs, High-Speed DIO,
High-Speed Digitizers, and Sources each have customized drivers for
high-end modular instrumentation systems. RF applications leverage
two drivers, NI-RFSG and NI-RFSA and Dynamic Signal Acquisition is
available through NI-DAQmx. You can expand the timing and triggering functionality of your PXI system
with PXI Timing and Synchronization products. These products provide
precision clock sources, custom routing of triggers for multi-chassis
synchronization, clock sharing, and more and are programmed with
NI-Sync. For more information visit ni.com/pxi.
NI-VISA is the National Instruments implementation of the VISA
specification. VISA is a uniform API for communicating and controlling
USB, Serial, GPIB, PXI, VXI, and various other types of instruments. This
API aids in the creation of portable applications and instrument drivers. For
information on writing your own PXI instrument driver with NI-VISA,
refer to the NI-VISA Getting Started Manual and the readme.txt file in
the NI-VISA directory. For more information visit ni.com/visa.
With LabVIEW for Linux and support for over two hundred devices on
Linux with the NI-DAQmx driver, you can now create Virtual Instruments
based on the Linux OS. Instrument control in Linux has been improved by
the NI-VISA driver for Linux and NI Modular Instruments are partially
supported This chapter contains information about installing and configuring your
NI PXI-8105 controller.
Installing the NI PXI-8105
This section contains general installation instructions for the NI PXI-8105.
Consult your PXI chassis user manual for specific instructions and
warnings.
1. Plug in your chassis before installing the NI PXI-8105. The power
cord grounds the chassis and protects it from electrical damage while
you install the module. (Make sure the power switch is turned off.)
Caution To protect both yourself and the chassis from electrical hazards, leave the chassis
powered off until you finish installing the NI PXI-8105 module.
2. Remove any filler panels blocking access to the system controller slot
(Slot 1) in the chassis.
3. Touch the metal part of the case to discharge any static electricity that
might be on your clothes or body.
4. Remove the protective plastic covers from the four bracket-retaining
screws as shown in Figure 2-1.
