主營產品
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
FBM211模擬量輸出模塊
使用和應用領域力士樂Indramat制造的驅動控制器設計用于控制：電機并監控其運行。
電機的控制和監控可能需要額外的傳感器和演員。
注：驅動控制器只能與附件一起使用以及本文件中規定的部件。如果組件沒有已明確命名，則可能未安裝或
有聯系的。這同樣適用于電纜和線路。僅允許在指定配置和使用軟件和固件的組件組合
如相關功能描述中所述。
每個驅動控制器必須在啟動前進行編程，使馬達可以執行應用的特定功能。
ECODRIVE03系列的驅動器控制器設計用于：?jiǎn)屋S或多軸驅動和控制應用。
為確保特定應用，驅動器控制器可用具有不同的驅動功率和不同的接口。
屬于ECODRIVE03的驅動控制器的典型應用家庭成員包括：
?搬運和安裝系統，
?包裝和食品機械，
?印刷和紙張加工機器，以及機床。
驅動控制器可以?xún)H在組件下操作，此處所述的安裝和環境條件（溫度，保護系統、濕度、EMC要求等）和指定的位置。
2.2不當使用使用上述參考區域之外的驅動器控制器
應用或在除中所述之外的操作條件下文件和規定的技術數據被定義為“不適當使用”。
在以下情況下，不得使用驅動器控制器：
它們受到不符合上述要求的操作條件的影響
規定的環境條件。這包括例如操作
在極端溫度波動的情況下，或極高的最高溫度，或者
?力士樂因德拉馬特并未為此專門發布
意圖請注意一般安全中概述的規范說明書
Areas of use and application
Drive controllers made by Rexroth Indramat are designed to control
electrical motors and monitor their operation.
Control and monitoring of the motors may require additional sensors and
actors.
Note: The drive controllers may only be used with the accessories
and parts specified in this document. If a component has not
been specifically named, then it may not be either mounted or
connected. The same applies to cables and lines.
Operation is only permitted in the specified configurations and
combinations of components using the software and firmware
as specified in the relevant function descriptions.
Every drive controller has to be programmed before starting it up, making
it possible for the motor to execute the specific functions of an application.
The drive controllers of the ECODRIVE03 family are designed for use in
single or multiple-axis drive and control applications.
To ensure an application-specific use, the drive controllers are available
with differing drive power and different interfaces.
Typical applications of drive controllers belonging to the ECODRIVE03
family are:
? handling and mounting systems,
? packaging and foodstuff machines,
? printing and paper processing machines and
? machine tools.
The drive controllers may only be operated under the assembly,
installation and ambient conditions as described here (temperature,
system of protection, humidity, EMC requirements, etc.) and in the
position specified.
2.2 Inappropriate use
Using the drive controllers outside of the above-referenced areas of
application or under operating conditions other than described in the
document and the technical data specified is defined as “inappropriate
use".
Drive controllers may not be used if
? they are subject to operating conditions that do not meet the above
specified ambient conditions. This includes, for example, operation
under water, in the case of extreme temperature fluctuations or
extremely high maximum temperatures or if
? Rexroth Indramat has not specifically released them for that intended
purpose. Please note the specifications outlined in the general safety
instructions!
