主營產品
PLC可編程控制器模塊，DCS卡件，ESD系統卡件，振動監測系統卡件，汽輪機控制系統模塊，燃?xì)獍l(fā)電機備件等，優勢品牌：Allen Bradley、BentlyNevada、ABB、Emerson Ovation、Honeywell DCS、Rockwell ICS Triplex、FOXBORO、Schneider PLC、GE Fanuc、Motorola、HIMA、TRICONEX、Prosoft等各種進口工業零部件
產品廣泛應用于冶金、石油天然氣、玻璃制造業、鋁業、石油化工、煤礦、造紙印刷、紡織印染、機械、電子制造、汽車制造、塑膠機械、電力、水利、水處理/環保、鍋爐供暖、能源、輸配電等等
ASSY 11993R2機器人模塊
干擾記錄器功能將受到一般限制記錄模擬變量，并由一般啟動或一般跳閘信號。二進制信號狀態的變化仍然由事件記錄器記錄。因此，對于給定數量的信道和電力系統頻率，容量足以應付540ms的10個事件每個的持續時間。文件PLOT.TXT陰謀。WinEVE、REVAL（用于評估干擾記錄器數據的程序）和Interface（數據轉換程序）的TXT用于測試集XS92a上的運行干擾數據）。
一般評論程序（WinEVE、REVAL和Interface）需要該文件陰謀。TXT能夠處理干擾記錄器數據。
對于接口，所有干擾記錄器數據Rexxx。xxx必須從字母RE開始。這些比率使WinEVE能夠確定次級
價值觀這些比率必須乘以主要c.t和v.t，以獲得主要系統值。接口不評估CO、TR和UN。
自動創建文件plotxxx.txt：文件plotxxx。txt自動保存在當前目錄中保存時，操作員程序（HMI）從中啟動RE。316設置。plotxxx中的幾個文件。具有不同站號的txt（xxx）可以
可合并為單個plot.txt。文件繪圖。txt必須位于與REVAL的干擾記錄器數據位置相同評估方案。
安裝數據評估程序的說明
必須嚴格按照相關操作說明安裝數據評估程序。懷恩夫?qū)⑽募癙LOT.TXT”復制到以下目錄：C： \I650\事件調試過程中應記錄干擾每個繼電器和存儲在上述目錄中的記錄。安裝樁號參數文件的步驟如下：
啟動WINEVE程序。
打開故障記錄
出現以下錯誤消息：C： \I650\車站\ST0xx.標準桿數找不到文件。
單擊確定。
選擇“參數”中的菜單項“導入工作站文件”菜單
選擇文件繪圖。TXT屬于該干擾記錄。在“參數”菜單中選擇菜單項“保存工作站”
The disturbance recorder function will thus be generally confined
to recording the analogue variables and be triggered by the
general start or general trip signals. Changes in the states of binary signals are nevertheless registered by the event recorder.It follows that for the given number of channels and power system frequency, the capacity is sufficient for 10 events of 540 ms
duration each.
File PLOT.TXT
PLOT.TXT for WinEVE, REVAL (programs for evaluating disturbance recorder data) and INTERFAC (data conversion program
for running disturbance data on the test set XS92a).
General remarks
The programs (WinEVE, REVAL and INTERFAC) need the file
PLOT.TXT to be able to process the disturbance recorder data.
For INTERFAC, all disturbance recorder data RExxxx.xxx must
start with the letters RE.These ratios enable WinEVE to determine the secondary
values. These ratios must be multiplied by the ratio of the
main c.t’s and v.t’s to obtain the primary system values.
INTERFAC does not evaluate CO, TR and UN.
Automatic creation of the file plotxxx.txt:
The file plotxxx.txt is automatically saved in the current directory
from which the operator program (HMI) was started when saving
the RE. 316 settings.
Several files plotxxx.txt with different station numbers (xxx) can
be combined to a single plot.txt. The file plot.txt must be at the
same location as the disturbance recorder data for the REVAL
evaluation program.Instructions for installing the data evaluation program
The data evaluation program must be installed in strict accordance with the relative operating instructions.
WINEVE
Copy the file “PLOT.TXT” to the directory:
C:\I650\EVENTS
A disturbance should be recorded during the commissioning of
every relay and the record stored in the directory given above.
The procedure for installing the station parameter files is as follows:
Start the WINEVE program.
Open a fault record
The following error message appears:
C:\I650\STATION\ST0xx.PAR
Could not find file.
Click on OK.
Select the menu item “Import station file” in the “Parameter”
menu.
Select the file PLOT.TXT belonging to this disturbance recording.
Select the menu item “Save station” in the “Parameter” menu
